BEGA 23 259.1 Wall Luminaire Instructions

: June 1, 2024
: BEGA

Table of Contents

BEGA 23 259.1 Wall Luminaire
Product Information
Product Usage Instructions
Application
Product Description
Safety
Overvoltage protection
Lamp
Installation
Dimension
Cleaning And Maintenance
Replacement of the LED module
Spares Parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 23 259.1 Wall Luminaire

BEGA-23-259.1-Wall-Luminaire-Product

Product Information

Specifications:

Lamp Module connected wattage: 19.2 W
Connected luminaire wattage: 22.4 W
Rated temperature: 25 – 35°C
Ambient temperature: 25 – 35°C
Module designation: 3x LED-0425/930
Colour temperature: 3000 K
Colour rendering index (CRI): > 90
Module luminous flux: 3165 lm
Luminous luminaire flux: 2170 lm
Luminous efficiency: 96.9 lm/W

Product Usage Instructions

Safety Information:
The installation and operation of this luminaire must adhere to national safety regulations. Only a qualified electrician should perform installation and commissioning to prevent damage due to improper use or installation. Any modifications to the luminaire should be done by authorized personnel.
Overvoltage Protection:
The electronic components in the luminaire are protected against overvoltage as per DIN EN 61547 standards. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.
Facility:
When mounting or dismantling the product, maintain a minimum distance of 450 mm between the removable cap and the wall. Avoid direct contact with the light output opening of the LED during installation or relamping to prevent damage to the high-quality electronic components.

Spares:
Available spare parts include spare glass, an LED power supply unit, LED modules in both 3000 K and 4000 K variants, and a gasket for maintenance purposes.

FAQ:

Q: Can I install the luminaire myself?
A: No, installation and commissioning should only be done by a qualified electrician to ensure compliance with safety regulations.
Q: Where can I find overvoltage protection components?
A: Overvoltage protection components can be found on the manufacturer’s website at www.bega.com.

Application

Wall luminaire · indoor luminaire made of handblown opal glass and metal housing, for all lighting tasks in interior applications.
They are ideal for places where a soft and uniform lighting distribution is required.
Luminaire with a high protection class.

Product Description

Luminaire made of Aluminium, finish colour white
Hand-blown opal glass
Two elongated mounting holes
Width 6 mm · 450 mm spacing
Insulating housing with cable entry for mains supply cable up to ø 10,5 mm, max. 3 x 1,5@
Connection terminal 2.5@
Earth conductor connection
Complies with flicker requirements by IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit 220-240 V x 0/50-60 Hz
DC 198-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK02
Protection against mechanical impacts < 0.2 joule
– Safety mark
– Conformity mark
Weight: 2.6 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 19.2 W
Luminaire connected wattage 22.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

23 259.1 K3

Module designation 3x LED-0425/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 3165 lm
Luminaire luminous flux 2170 lm
Luminaire luminous efficiency 96,9 lm/W

23 259.1 K4

Module designation 3x LED-0425/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 3345 lm
Luminaire luminous flux 2293 lm
Luminaire luminous efficiency 102,4 lm/W

Insulation housing

Installation

For mounting and dismantling please keep a minimum distance of 450 mm between the removable cap and the wall.
LEDs are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.

Open luminaire:

Loosen the knob, and remove the cap and glass.
Drill mounting holes into the mounting surface – spacing 450 mm.
For the mains supply connecting open the insulation housing – pull open – strip mains supply cable max. 15 mm and lead it into the insulation housing – see sketch.
Make earth conductor connection and electrical connection.
Connect both parts of the insulation housing until they audibly engage.
The outer coating of the cable has to be fully enclosed by the compression nipple.
Fix the luminaire with enclosed or any other suitable fixing material onto the mounting surface.
Remove bubble wrap underneath the LED module.
Place glass into the luminaire housing, close the luminaire with the cap and screw in the knob into the cap.

Dimension

BEGA-23-259.1-Wall-Luminaire-Fig-1

Cleaning And Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt.
The defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system.
Loosen the lateral knob, remove the cap and take out the glass.
Please follow the installation instructions for the LED module.
The defective glass must be replaced.
Insert glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.