BEGA 45487.2PK27 Pendant Light, Stainless Steel Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 45487.2PK27 Pendant Light Stainless Steel Instruction Manual
Dimension
Instructions for use
Application
Pendant luminaire · indoor luminaire for free radiating and uniform light with
white synthetic globe and with metal housing.
Lamp
Luminaire with screw base E 27 Lamp output max. 100 W This product contains
light sources of energy efficiency class E
Supplied lamp
BEGA LED lamp 13565
LED Retrofit 12 W · 1400 lm · 2700 K dimmable
Supplied lamp
BEGA LED lamp 13592
LED Retrofit 12 W · 1520 lm · 3000 K dimmable
Luminaire efficiency: 88%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product description
Stainless steel fitter and canopy
White synthetic sphere
Black flex suspension 3 × 0,75
with 1 steel messenger wire
Overall length of luminaire approx. 2000mm
Connecting terminals 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
Impact strength IK10
Protection against mechanical
impacts < 20 joule
CE – Conformity mark
Weight: 2.4 kg
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
Suspend the luminaire from the ceiling hook. Make earth connection and electrical connection to the terminals. Insert lamp into lamp holder and lock it by turning it clockwise. Unscrew sphere cover and lift it. Place sphere onto the sphere support and adjust it accordingly. Screw sphere cover onto the sphere. Press canopy against the ceiling. The clamping effect for different cable diameters can be adjusted by the knurled nut at the lower part of the canopy.
Shortening of flex suspension
The flex suspension can only be shortened at the canopy end. Remove terminals from the cable. Loosen fixing screw at the hanger, pull out the steel wire and loosen screws from the cable collar. Shorten cable to the desired length and strip end approx. 10 cm. Please consider these when cutting the cable to the required length. Place cable back into the cable collar and tighten both screws. Make sure that approx. 5 mm off the cable coating protrude out off the collar. Lead the steel wire through the little hole in the hanger and lead it back through the fixing terminal. Pull steel wire tight and fix it with screw. Connect wires to the terminals and make sure to connect the steel wire to the earth terminal.
Relamping · Maintenance
Disconnect the electrical installation. To clean the luminaire and to change the lamp unscrew sphere cover and lift it. Take off the sphere. Clean sphere and luminaire. Use only solvent-free cleansers. Change the lamp.
Spares
LED lamp: 2700 K 13 565
LED lamp: 3000 K 13 592
White synthetic sphere: 15 000 189
Lampholder: 63 000 339
Cover cap: 71 001 575 .1L
Canopy: 71 001 636 .1M2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>