BEGA 12141PK27 Ceiling and Wall Luminaire Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 12141PK27 Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
FAQs
DIMENSION
Instructions for use
Product Description
Installation
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 12141PK27 Ceiling and Wall Luminaire

Product Information

Specifications
- Lamp Module connected wattage : 26.4 W
- Luminaire connected wattage: 29.4 W
- Rated temperature: 25 – 50°C
- Ambient temperature max: 50°C

The luminaire is designed for specific lamp modules with different colour temperatures and luminous flux values. It comes with optional metal trim rings in three enamel surfaces for customization.

Product Usage Instructions

Installation
- Ensure the installation is carried out by a qualified electrician in compliance with national safety regulations.
- Insert the luminaire housing into the trim ring before mounting it on the surface.
Removing Synthetic Diffuser
- To release the synthetic diffuser, turn it counter-clockwise from the luminaire housing.
Optional Accessories
- Metal trim rings in white, palladium, and glossy silver are available as optional accessories and must be ordered separately.

FAQs

Q: Can I use different lamp modules with this luminaire?
- A: The luminaire is designed for specific lamp modules with different colour temperatures and luminous flux values. Please refer to the product manual for compatible options.
Q: How do I order spare parts for the luminaire?
- A: You can order spare parts such as synthetic covers and LED units with various color temperatures by using the provided part numbers.

DIMENSION

Ceiling and wall luminaire for indoor use

$BEGA-12141PK27-Ceiling-and-Wall-Luminaire-FIG-1 $1$$

Instructions for use

Application

Ceiling and wall luminaire indoor luminaire made of impact-resistant synthetic diffuser and metal housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required.

Product Description

Metal housing, finish colour white
Impact-resistant synthetic diffuser, white, with bayonet closure
2 mounting holes ø 5.5mm Distance apart 230mm
2 cable entries for through-wiring for mains cable up to ø 11 mm max. 5 x 1.5@
Connection terminal 2.5@
Earth conductor connection
Complies with flicker requirements by IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V x 0/50-60 Hz
DALI-controllable
Number of DALI addresses: 0
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Impact strength IK10
Protection against mechanical impacts < 20 joule
– Safety mark
– Conformity mark
Weight: 2.9 kg
This product contains light sources of energy efficiency class(es) D, E

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage by DIN EN 61547.
To achieve additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 26.4 W
Luminaire connected wattage 29.4 W
Rated temperature ta=25 °C
Ambient temperature ta max=50 °C

12 141 PK27

Colour temperature 2700 K
Colour rendering index CRI >90
Module luminous flux 3845 lm
Luminaire luminous flux 2990 lm
Luminaire luminous efficiency 101,7 lm/W

12 141 PK3

Colour temperature 3000 K
Colour rendering index CRI >90
Module luminous flux 3970 lm
Luminaire luminous flux 3088 lm
Luminaire luminous efficiency 105 lm/W

12 141 PK4

Colour temperature 4000 K
Colour rendering index CRI >90
Module luminous flux 4135 lm
Luminaire luminous flux 3216 lm
Luminaire luminous efficiency 109,4 lm/W

Luminaire with trim ring: Before installing onto the mounting surface the luminaire housing must be inserted into the trim ring (accessory).

Installation

LEDs are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Pass the main supply cable through the grommet into the luminaire housing.
Fix luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets.
Dismantle the mains supply cable approx. 60 mm.
Make earth and electrical connections to the terminals.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
Place the synthetic diffuser into the luminaire housing and observe that the cam pins fit into the notches of the synthetic diffuser.
Screw in a synthetic diffuser by turning it clockwise.
Thus, you reach a safe and vibration resistant holding of the synthetic diffuser.
To release the synthetic diffuser from the luminaire housing, turn it counterclockwise.

Replacement of the LED unit

The designation of the LED unit is noted on a label in the luminaire.
The light colour and light output of BEGA replacement units correspond to those of the LED units originally fitted. The LED unit can be replaced by qualified persons using standard tools.
Disconnect from the main supply.
Unscrew the synthetic diffuser from the luminaire housing by turning it counter-clockwise.
Disassemble the LED unit.
Assemble the LED replacement unit.
Note the installation instructions for the LED unit.
Screw in a synthetic diffuser by turning it clockwise.
A damaged synthetic diffuser must be replaced.

Accessory · Trim rings