BEGA 71323 Connection Cable Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 71323 Connection Cable
Specifications:
- Colour: Graphite
- Length: 10 meters
- 1 plug, 3 pole, with protective cap
- 1 coupling, 3 pole, with a protective cap
- Protection Class: IP 67 (Dust-tight and protection against temporary immersion)
Product Usage Instructions
Installation:
When the power supply unit is fully loaded, the maximum cable length between the luminaire and the power supply unit must not exceed 100 meters. Insert the plug and coupling of the extension cable into the plug connector of the luminaire, power supply unit, or distribution box and screw together by hand. Do not use tools to tighten and loosen the screw caps.
Safety:
The installation and operation of this accessory should adhere to national safety regulations. The manufacturer will not be liable for any damage caused by improper use or installation. If modifications are made to the accessory, the modifier will be considered the manufacturer.
FAQ:
-
Q: What is the maximum cable length allowed between the luminaire and the power supply unit?
A: The maximum cable length should not exceed 100 meters when the power supply unit is fully loaded. -
Q: How can I configure the garden lighting system in the BEGA Smart app?
A: After a successful electrical connection, you can configure the garden lighting system in the BEGA Smart app.
Extension cable BEGA UniLink® Play
Instructions for use
Application
- Extension cable with plug connector for portable luminaires BEGA UniLink® Play.
- BEGA UniLink® Play is a system for smart garden lighting that is controlled via an app, remote control, or automation.
- All connection cables and components are installed above ground in the area of use.
- Thanks to the IP 67 standard, they are weather resistant year-round and highly durable.
- After a successful electrical connection, they can be configured in the BEGA Smart app.
Product Description
- Rubber cable H05RN-F 3 × 0,75@
- Colour graphite
- Length 10 m
- 1 plug, 3 pole, with protective cap
- 1 coupling, 3 pole, with a protective cap
- Protection class IP 67
- Dust-tight and protection against temporary immersion
- – Conformity mark
- Weight: 0.75 kg
Safety
- The installation and operation of this accessory are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If modifications are subsequently made to the accessory, the person who makes these modifications shall be considered the manufacturer.
Installation
- When the power supply unit is fully loaded, the maximum cable length between the luminaire and the power supply unit must not exceed 100 m.
- Insert plug and coupling of the extension cable into the plug connector of the luminaire, power supply unit, or distribution box and screw them together by hand.
- No tools may be used to tighten and loosen the screw caps.
Accessories
- 71 322 BEGA UniLink® Play Extension cable 5 m
- 71 324 BEGA UniLink® Play Extension cable 20 m
Separate instructions for use can be provided upon request.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden ·
info@bega.com www.bega.com