BEGA 56296 Pendant Luminaire Light Indoor Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
56296 Pendant Luminaire Light Indoor
Instruction Manual
56296 Pendant Luminaire Light Indoor
Pendant luminaire for indoor use
Instructions for use
Application
Pendant luminaire · indoor luminaire with handblown opal glass for directed
and free-radiating light.
Luminaire with cable suspension and metal canopy.
Lamp
Luminaire with screw base E 27
Lamp output max. 100 W
This product contains light sources of energy efficiency class E
Supplied lamp
BEGA LED lamp 13565
LED Retrofit 12 W · 1400 lm · 2700 K Supplied lamp
BEGA LED lamp 13592
LED Retrofit 12 W · 1520 lm · 3000 K
Luminaire efficiency: 79%
Detailed technical and lighting data for the lamps can be found in the data
sheets on our website.
Product description
Metal canopy, colour white
Hand-blown opal glass
Cable pendant · Sheath cable white 2 x 0,75@
Overall length of luminaire approx. 2000 mm
Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
**** – Conformity mark
Weight: 1.2 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Installation
Pull canopy down the cable.
Suspend the luminaire from the ceiling hook.
Make earth connection and electrical connection to the terminals. Push canopy
up to the ceiling.
The clamping effect for different cable diametres can be adjusted by the
knurled nut at the lower end of the canopy.
Insert the lamp.
Shortening of flex suspension
The flex suspension can only be shortened at the canopy end.
Remove terminals and hanger.
Shorten cable to the desired length and strip end approx. 8 cm. Please
consider these when cutting the cable to the required length.
Remake earth connection and electrical connection to the terminals.
Relamping · Maintenance
Disconnect the electrical installation.
Clean glass and fitter.
Use only solvent-free cleansers.
Change the lamp.
Spares
| Spare glass | 11 002 917 .1M RG |
|---|---|
| LED lamp 2700 K | 13 565 |
| LED lamp 3000 K | 13 592 |
| Lampholder | 63 000 357 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
info@bega.com
www.bega.com