BEGA 71332A Shield Instruction Manual
- June 1, 2024
- BEGA
Table of Contents
BEGA 71332A Shield
Specifications
- Material: Stainless Steel
- Steel Grade: 1.4301
- Product Description: Surround made of stainless steel
Product Usage Instructions
Installation
- Undo the hexagon socket screw (wrench size 3 mm).
- Insert the shield into the groove in the floodlight housing.
- Align the shield to the desired position.
- Secure the shield in place by tightening the hexagon socket screw.
FAQ
Q: Is the stainless steel surround durable?
A: Yes, the surround is made of high-quality stainless steel (Steel Grade 1.4301) for durability and longevity.
Q: Can modifications be made to the luminaire?
A: Modifications to the luminaire should not be made without consulting the manufacturer. Any modifications made without authorization may void the warranty and safety standards.
Technical amendments reserved
Shield
Instructions for use
Application
The shield can be installed by 360° and prevents lateral glare from one
direction up to 45°.
suitable for BEGA performance floodlights
85 126 · 85 132 · 85 138 · 85 143 · 85 145
85 147 · 85 150 · 85 155 · 85 160 · 85 165
85 167 · 85 169 · 85 173 · 85 175 · 85 232
85 233 · 85 238 · 85 239
Product description
Surround made of stainless steel Steel grade no. 1.4301 Colour graphite or
silver c – Conformity mark
Wind catching area: 0.01 m²
Weight: 0.15 kg
Safety
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Installation
Undo the hexagon socket screw (wrench size 3 mm) and insert the shield into
the groove in the floodlight housing. Align the shield and secure it in place.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>