RUST-OLEUM 60007 Rocksolid Polycuramine Garage Floor Coating Installation Guide

: June 16, 2024
: Rust-Oleum

RUST-OLEUM 60007 Rocksolid Polycuramine Garage Floor Coating

Product Information

Specifications
- Product Name: Rock Solid Kit Tan Base
- Product Identifier: 60007A
- Recommended Use: Epoxy Floor Coating
- Supplier: Rust-Oleum ROCK SOLID
- Address: 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Composition
- The product is composed of the following individual chemical components:
- 60007A
- 60007B
- 60169
Hazards Identification
- The product has the following hazards:
- Skin Irritation (Category 2)
- Skin Sensitizer (Category 1)
- Eye Irritation (Category 2A)
- STOT, Single Exposure (Category 3, RTI)
- Germ Cell Mutagenicity (Category 1B)
- Carcinogenicity (Category 1B)
Precautionary Statements
- The product has the following precautionary statements:
- P201: Obtain special instructions before use.
- P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
- P264: Wash hands thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P312: Call a POISON CENTER or doctor/physician if you feel unwell.
- P321: For specific treatment see label.
- P405: Store locked up.

Product Usage Instructions

Step 1: Preparation
- Prepare the surface by cleaning it thoroughly and removing any dirt, grease, or other contaminants. Use a suitable cleaner and follow the instructions provided.
Step 2: Mixing
- Mix the components 60007A, 60007B, and 60169 according to the instructions provided. Use the recommended ratios and ensure thorough mixing to achieve proper product performance.
Step 3: Application
- Apply the mixed product using a brush, roller, or sprayer.
- Follow the recommended application thickness and coverage rate for best results. Ensure even application and avoid over-application or pooling.
Step 4: Drying and Curing
- Allow the product to dry and cure according to the specified time provided in the instructions. Avoid any foot traffic or heavy use during this period to ensure proper curing and durability of the coating.
Step 5: Clean-Up
- Clean up any tools or equipment used with the product immediately after use. Use appropriate solvents or cleaners as recommended. Dispose of any unused products or empty containers according to local regulations.
Frequently Asked Questions (FAQ)
- Q: Can this product be used on wood surfaces?
- A: No, this product is specifically designed for use as an epoxy floor coating and is not recommended for wood surfaces.
- Q: Can I apply this product outdoors?
- A: Yes, this product can be applied outdoors, but it is recommended to do so in a well-ventilated area to ensure proper air circulation and drying.
- Q: How long does the product take to dry?
- A: The drying time of the product may vary depending on environmental conditions, but typically it takes around [insert drying time] to dry completely.

Product Information Sheet

Rust-Oleum Multi-Component Product Information Sheet

60007 RS GARAGE COAT TAN RSPCGC250T NEW 90O is a multi-component product composed of the following individual chemical components:

60007A ROCK SOLID KIT TAN BASE
60007B RKSOLID ACTIVATOR PART B
60169 CITRIC ETCH WITH WARNING LABELS

SDSs for each component follow this cover sheet.

Transportation Information

UN Number:| Domestic (USDOT)

N.A.

| International (IMDG)

3066

| Air (IATA)

3066

| TDG (Canada)

N.A.

---|---|---|---|---
Proper Shipping Name: Paint Products in Paint and Paint Related Paint and Paint Paint Products in
| Limited Quantities| Material| Related Material| Limited Quantities
Hazard Class:| N.A.| 8| 8| N.A.
Packing Group:| N.A.| II| II| N.A.
Limited Quantity:| Yes| Yes| No| Yes

Finished Good Schedule B Harmonized Tariff Code 3907.30.0000

Identification

Product Name: ROCK SOLID KIT TAN
BASE Revision Date: 4/9/2020
Product Identifier: 60007A
Supercedes Date: 4/8/2020
Recommended Use: Epoxy Floor Coating
Supplier: Rust-Oleum ROCKSOLID 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Manufacturer: Rust-Oleum ROCKSOLID 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Preparer: Regulatory Department
Emergency Telephone: 24 Hour Hotline: 847-367-7700

Hazards Identification

Classification Symbol(s) of Product

Signal Word

Danger

Possible Hazards

27% of the mixture consists of ingredient(s) of unknown acute toxicity.

GHS HAZARD STATEMENTS

Skin Irritation, category 2 H315 Causes skin irritation.
Skin Sensitizer, category 1 H317 May cause an allergic skin reaction.
Eye Irritation, category 2A H319 Causes serious eye irritation.
STOT, Single Exposure, category 3, RTI H335 May cause respiratory irritation.
Germ Cell Mutagenicity, category 1B H340 May cause genetic defects.
Carcinogenicity, category 1B H350 May cause cancer.

GHS LABEL PRECAUTIONARY STATEMENTS

P201 Obtain special instructions before use.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 For specific treatment see label.
P405 Store locked up.
Date Printed: 10/19/2022
P501 Dispose of contents/container in accordance with local, regional and national regulations.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P332+P313 If skin irritation occurs: Get medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P362+P364 Take off contaminated clothing and wash it before reuse.

GHS SDS PRECAUTIONARY STATEMENTS

P363 Wash contaminated clothing before reuse.

Composition Information on Ingredients

HAZARDOUS SUBSTANCES

Chemical Name| CAS-No.| Wt.% Range GHS Symbols GHS Statements
---|---|---
| Range|
Bisphenol A Epoxy Resin| 25085-99-8| 50-75| GHS07| H315-317-319-335
Titanium Dioxide| 13463-67-7| 10-25| Not Available| Not Available
Epichlorohydrin-Bisphenol A Resin| 25068-38-6| 10-25| GHS07| H315-317-319-335
1-Chloro-4-(Trifluoromethyl)Benzene| 98-56-6| 10-25| GHS07| H315-319-332-335
Neopentyl Glycol Diglycidyl Ether| 17557-23-2| 2.5-10| GHS07| H315-317
Formaldehyde, polymer with (chloromethyl)oxirane|
---|---
and phenol
Naphtha (Petroleum), Heavy Alkylate| 64741-65-7| 0.1-1.0| GHS06-GHS08| H304-331-340-350
2,6-Dimethyl-4-Heptanone| 108-83-8| 0.1-1.0| GHS02-GHS06| H226-331-335
Carbon Black| 1333-86-4| 0.1-1.0| Not Available| Not Available

First-Aid Measures

FIRST AID – EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed. Remove contact lenses, if present, and easy to do. Continue rinsing.
FIRST AID – SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.
FIRST AID – INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID – INGESTION: Swallowing less than an ounce will not cause significant harm. For larger amounts, do not induce vomiting, but give one or two glasses of water to drink and get medical attention. If swallowed, do not induce vomiting. If the victim is conscious and alert, give 2 to 4 cupfuls of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. Treat symptomatically and supportively. If swallowed, rinse mouth with water. If feeling unwell, get medical attention.

Fire-Fighting Measures

EXTINGUISHING MEDIA: Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: Keep containers tightly closed. FLASH POINT IS TESTED TO BE GREATER THAN 200 DEGREES F. No unusual fire or explosion hazards were noted.
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool closed containers to prevent the buildup of steam. If water is used, fog nozzles are preferred.
Special Fire and Explosion Hazard (Combustible Dust): No Information

Accidental Release Measures

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: If spilled, contain spilled material and remove it with an inert absorbent. Dispose of contaminated absorbent, container, and unused contents by local, state, and federal regulations. Do not incinerate closed containers.

Handling and Storage

HANDLING:
- Wash thoroughly after handling. Wash hands before eating.
- Remove contaminated clothing and launder it before reuse.
- Use only with adequate ventilation. Follow all SDS and label precautions even after the container is emptied because it may retain product residues.
- Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin, and clothing.
STORAGE:
- Store in a dry, well-ventilated place.
- Keep the container tightly closed when not in use.
- Advice on Safe Handling of Combustible
- Dust: No Information

Exposure Controls / Personal Protection

Chemical Name| CAS- No.| Weight % Less Than| ACGIH TLV- TWA| ACGIH TLV- STEL| OSHA PEL-TWA| OSHA PEL- CEILING
---|---|---|---|---|---|---
Bisphenol A Epoxy Resin| 25085-99-8| 55.0| N.E.| N.E.| N.E.| N.E.
Titanium Dioxide| 13463-67-7| 15.0| 10 mg/m3| N.E.| 15 mg/m3| N.E.
Epichlorohydrin-Bisphenol A

Resin

| 25068-38-6| 15.0| N.E.| N.E.| N.E.| N.E.
1-Chloro-4-(Trifluoromethyl)

Benzene

| 98-56-6| 15.0| 2.5 mg/m3| N.E.| 2.5 mg/m3| N.E.
Neopentyl Glycol Diglycidyl

Ether

| 17557-23-2| 10.0| N.E.| N.E.| N.E.| N.E.
Formaldehyde, a polymer with

(chloromethyl)oxirane and phenol

| 9003-36-5| 1.0| N.E.| N.E.| N.E.| N.E.
Naphtha (Petroleum), Heavy Alkylate| 64741-65-7| 1.0| N.E.| N.E.| N.E.| N.E.
2,6-Dimethyl-4-Heptanone| 108-83-8| 1.0| 25 ppm| N.E.| 50 ppm| N.E.
Carbon Black| 1333-86-4| 1.0| 3 mg/m3| N.E.| 3.5 mg/m3| N.E.

PERSONAL PROTECTION

ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Prevent the build-up of vapors by opening all doors and windows to achieve cross-ventilation.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator’s use.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splashes of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to the safety supervisor or industrial hygienist for further guidance regarding types of personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking, or smoking. Remove contaminated clothing immediately and launder it before reuse.
Engineering Measures for Combustible Dust: No Information.

Physical and Chemical Properties

Appearance: Liquid
Odor: Characteristic
Specific Gravity: 1.291
Freeze Point, °C: N.D.
Solubility in Water: Slight
Decomposition Temp., °C: N.D.
Boiling Range, °C: 136 – 537
Flammability: Does not Support Combustion
Evaporation Rate: Slower than Ether
Vapor Density: Heavier than Air
Physical State: Liquid
Odor Threshold: N.E.
pH: N.A.
Viscosity: N.D.
Partition Coefficient, n-octanol/ water: N.D.
Explosive Limits, vol%: 0.9 – 10.5
Flash Point, °C: 94
Auto-Ignition Temp., °C: N.D.
Vapor Pressure: N.D.

(See “Other information” Section for abbreviation legend)

Stability and Reactivity

Conditions to Avoid: Avoid excess heat. Keep from freezing.
Incompatibility: Incompatible with strong oxidizing agents, strong acids, and strong alkalies.
Hazardous Decomposition: When heated to decomposition, it emits acrid smoke and irritating fumes.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.

Toxicological Information

EFFECTS OF OVEREXPOSURE – EYE CONTACT: Irritating, and may injure eye tissue if not removed promptly.
EFFECTS OF OVEREXPOSURE – SKIN CONTACT: Low hazard for usual industrial handling or commercial handling by trained personnel.
EFFECTS OF OVEREXPOSURE – INHALATION: High gas, vapor, mist or dust concentrations may be harmful if inhaled. Avoid breathing fumes, spray, vapors, or mist.
EFFECTS OF OVEREXPOSURE – INGESTION: The substance may be harmful if swallowed.

EFFECTS OF OVEREXPOSURE – CHRONIC HAZARDS:

Contains carbon black. Chronic inflammation, lung fibrosis, and lung tumors have been observed in some rats experimentally exposed for long periods to excessive concentrations of carbon black and several insoluble fine dust particles.
Tumors have not been observed in other animal species (i.e., mice and hamsters) under similar circumstances and study conditions.
Epidemiological studies of North American workers show no evidence of clinically significant adverse health effects due to occupational exposure to carbon black.
Carbon black is listed as a Group 2B-“Possibly carcinogenic to humans” by IARC and is proposed to be listed as A4- “not classified as a human carcinogen” by the American Conference of Governmental Industrial Hygienists.
Significant exposure is not anticipated during brush application or drying. The risk of overexposure depends on the duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of carbon black in the formula.
Contains Titanium Dioxide. Titanium Dioxide is listed as a Group 2B-“Possibly carcinogenic to humans” by IARC.
No significant exposure to Titanium Dioxide is thought to occur during the use of products in which Titanium Dioxide is bound to other materials, such as in paints during brush application or drying.
The risk of overexposure depends on the duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of Titanium Dioxide in the formula. (Ref: IARC Monograph, Vol. 93, 2010)
PRIMARY ROUTE(S) OF ENTRY: Eye Contact, Ingestion, Inhalation, Skin Absorption, Skin Contact

ACUTE TOXICITY VALUES
The acute effects of this product have not been tested. Data on individual components are tabulated below:

CAS- No.| Chemical Name| Oral LD50| Dermal LD50| Vapor LC50
---|---|---|---|---
25085-99-8| Bisphenol A Epoxy Resin| >5000| >20000| >20
13463-67-7| Titanium Dioxide| >10000 mg/kg Rat| 2500 mg/kg| N.E.
25068-38-6| Epichlorohydrin-Bisphenol A Resin| 11400 mg/kg Rat| >5000| 25 g/L
98-56-6| 1-Chloro-4-(Trifluoromethyl)Benzene| 13000 mg/kg Rat| >2690 mg/kg Rabbit| N.E.
17557-23-2| Neopentyl Glycol Diglycidyl Ether| 4500 mg/kg Rat| N.E.| N.E.
9003-36-5| Formaldehyde, polymer with (chloromethyl) oxirane and phenol| >2000 mg/kg Rat| N.E.| N.E.
64741-65-7| Naphtha (Petroleum), Heavy Alkylate| >7000 mg/kg Rat| >2000 mg/kg Rabbit| >5.04 mg/L Rat
108-83-8| 2,6-Dimethyl-4-Heptanone| 5750 mg/kg Rat| N.E.| N.E.
1333-86-4| Carbon Black| >15400 mg/kg Rat| N.E.| N.E.

N.E. – Not Established

Ecological Information

ECOLOGICAL INFORMATION: Product is a mixture of listed components. No ecotoxicity data was found for this product.

Disposal Information

DISPOSAL: Dispose of material in accordance to local, state, and federal regulations and ordinances.

Transport Information

$RUST-OLEUM-60007-Rocksolid-Polycuramine-Garage-Floor-Coating-FIG-1 $4$$

Regulatory Information

U.S. Federal Regulations:

CERCLA – SARA Hazard Category
- This product has been reviewed according to the EPA ‘Hazard Categories’ promulgated under Sections 311 and 312 of the
- Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories:
- Carcinogenicity, Skin Corrosion or Irritation, Respiratory or Skin Sensitization, Serious eye damage or eye irritation, Specific target organ toxicity (single or repeated exposure), Germ cell mutagenicity
SARA Section 313
- This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
- No Sara 313 components exist in this product.
Toxic Substances Control Act
- This product contains the following chemical substances subject to the reporting requirements of TSCA 12(b) if exported from the United States:
- No TSCA 12(b) components exist in this product.

U.S. State Regulations:

California Proposition 65
- WARNING: Cancer – www.P65Warnings.ca.gov.

Other Information

HMIS RATINGS

Health: 2*
Flammability: 1
Physical Hazard: 0
Personal Protection: X

NFPA RATINGS

Health: 2
Flammability: 1
Instability: 0
Volatile Organic Compounds: 0 g/L
SDS REVISION DATE: 4/9/2020
REASON FOR REVISION:
- Revision Description Changed
- Product Composition Changed
- Substance and/or Product Properties Changed in Section(s):
- 01 – Identification
- 02 – Hazard Identification
- 09 – Physical & Chemical Properties
- 15 – Regulatory Information
- 16 – Other Information
- Revision Statement(s) Changed
Legend: N.A. – Not Applicable, N.D. – Not Determined, N.E. – Not Established

The manufacturer believes, to the best of its knowledge, information, and belief, the information contained herein to be accurate and reliable as of the date of this safety data sheet. However, because the conditions of handling, use, and storage of these materials are beyond our control, we assume no responsibility or liability for personal injury or property damage incurred by the use of these materials. The manufacturer makes no warranty, expressed or implied, regarding the accuracy or reliability of the data or results obtained from their use. All materials may present unknown hazards and should be used with caution. The information and recommendations in this material safety data sheet are offered for the users’ consideration and examination. It is the responsibility of the user to determine the final suitability of this information and to comply with all applicable international, federal, state, and local laws and regulations.

Identification

Product Name: CITRIC ETCH WITH WARNING LABELS
Revision Date: 5/10/2021
Product Identifier: 60169
Supercedes Date: 4/6/2021
Recommended Use: Concrete Etch/ Citric Acid
Supplier: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Manufacturer: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 USA
Preparer: Regulatory Department
Emergency Telephone: 24 Hour Hotline: 847-367-7700

Hazards Identification

Classification Symbol(s) of Product

Signal Word

Warning

Possible Hazards

100% of the mixture consists of ingredient(s) of unknown acute toxicity.

GHS HAZARD STATEMENTS

Eye Irritation, category 2A H319 Causes serious eye irritation.

GHS LABEL PRECAUTIONARY STATEMENTS

P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.

Composition / Information on Ingredients|
HAZARDOUS SUBSTANCES

Chemical Name /CAS-No. /Wt.% Range /GHS Symbols /GHS Statements

Citric Acid, Anhydrous
77-92-9
75-100 GHS07
H319

First-Aid Measures

FIRST AID – EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
FIRST AID – SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.
FIRST AID – INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID – INGESTION: If swallowed, rinse mouth with water. If feeling unwell, get medical attention.

Fire-Fighting Measures

EXTINGUISHING MEDIA: Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: Keep containers tightly closed. FLASH POINT IS TESTED TO BE GREATER THAN 200 DEGREES F. No unusual fire or explosion hazards were noted.
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool closed containers to prevent the buildup of steam. Special Fire and Explosion Hazard (Combustible Dust): No Information

Accidental Release Measures

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Dispose of according to local, state (provincial), and federal regulations. Do not incinerate closed containers. Sweep up gently to avoid dust cloud formation.

Handling and Storage

HANDLING: Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder it before reuse. Use only with adequate ventilation. Follow all SDS and label precautions even after the container is emptied because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin, and clothing.
STORAGE: Store in a dry, well-ventilated place. Keep the container tightly closed when not in use.
Advice on Safe Handling of Combustible Dust: No Information

Exposure Controls / Personal Protection

Chemical Name|

CAS- No.

| Weight % Less Than| ACGIH TLV- TWA| ACGIH TLV- STEL|

OSHA PEL-TWA

| OSHA PEL- CEILING
---|---|---|---|---|---|---
Polyoxypropylenediamine| 9046-10-0| 50.0| N.E.| N.E.| N.E.| N.E.
Benzyl Alcohol| 100-51-6| 35.0| N.E.| N.E.| N.E.| N.E.
4,4′-(1-Methylethylidene)

Bisphenol

| 80-05-7| 20.0| N.E.| N.E.| N.E.| N.E.
Isophorone Diamine| 2855-13-2| 15.0| N.E.| N.E.| N.E.| N.E.

PERSONAL PROTECTION

ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve crossventilation.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator’s use.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial hygienist for further guidance regarding types of personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing immediately and launder before reuse.
Engineering Measures for Combustible Dust: No Information

Physical and Chemical Properties

Appearance: Particulate Solid
Physical State: Solid
Odor: Solvent Like
Odor Threshold: N.E.
Specific Gravity: 1.665
pH: N.A.
Freeze Point, °C: N.D.
Viscosity: N.D.
Solubility in Water: Soluble Partition Coefficient, n-octanol/
Decomposition Temp., °C: N.D.
water: N.D.
Boiling Range, °C: 175 – 537
Explosive Limits, vol%: N.A. – N.A.
Flammability: Does not Support Combustion
Flash Point, °C: 94
Evaporation Rate: Slower than Ether Auto-Ignition
Temp., °C: N.D.
Vapor Density: Heavier than Air Vapor
Pressure: N.D.

(See “Other information” Section for abbreviation legend)

Stability and Reactivity

Conditions to Avoid: No Information
Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Hazardous Decomposition: When heated to decomposition, it emits acrid smoke and irritating fumes.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.

Toxicological Information

EFFECTS OF OVEREXPOSURE – EYE CONTACT: Can cause severe eye irritation. Irritating, and may injure eye tissue if not removed promptly.
EFFECTS OF OVEREXPOSURE – SKIN CONTACT: Contact causes skin irritation. Low hazard for usual industrial handling or commercial handling by trained personnel.
EFFECTS OF OVEREXPOSURE – INHALATION: High gas, vapor, mist or dust concentrations may be harmful if inhaled. Avoid breathing fumes, spray, vapors, or mist.
EFFECTS OF OVEREXPOSURE – INGESTION: Expected to be a low ingestion hazard. May cause nausea.
EFFECTS OF OVEREXPOSURE – CHRONIC HAZARDS: No Information
PRIMARY ROUTE(S) OF ENTRY: Eye Contact, Ingestion, Inhalation, Skin Contact

ACUTE TOXICITY VALUES
The acute effects of this product have not been tested. Data on individual components are tabulated below:

CAS-No. /Chemical Name /Oral LD50 /Dermal LD50 /Vapor LC50
77-92-9 /Citric Acid, Anhydrous /3000 mg/kg /Rat >2000 /mg/kg Rat N.E.

Ecological Information

ECOLOGICAL INFORMATION: Product is a mixture of listed components.

Disposal Information

DISPOSAL: Dispose of material in accordance to local, state, and federal regulations and ordinances.

Transport Information

$RUST-OLEUM-60007-Rocksolid-Polycuramine-Garage-Floor-Coating-FIG-1 $5$$

Regulatory Information

Federal Regulations:

CERCLA – SARA Hazard Category
- This product has been reviewed according to the EPA ‘Hazard Categories’ promulgated under Sections 311 and 312 of the
- Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories:
- Serious eye damage or eye irritation
SARA Section 313
- This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
- Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
- No Sara 313 components exist in this product.
Toxic Substances Control Act
- This product contains the following chemical substances subject to the reporting requirements of TSCA 12(b) if exported from the United States:
- No TSCA 12(b) components exist in this product.
U.S. State Regulations:
- California Proposition 65
- WARNING: No Prop. 65 warning is required.

Other Information
HMIS RATINGS

Health: 2
Flammability: 1
Physical Hazard: 0
Personal Protection: X

NFPA RATINGS

Health: 2
Flammability: 1
Instability: 0
Volatile Organic Compounds: 0 g/L
SDS REVISION DATE: 5/10/2021
REASON FOR REVISION: Substance and/or Product Properties Changed in Section(s): 15 – Regulatory Information Revision Statement(s) Changed
Legend: N.A. – Not Applicable, N.D. – Not Determined, N.E. – Not Established

Rust-Oleum Corporation believes, to the best of its knowledge, information, and belief, the information contained herein to be accurate and reliable as of the date of this safety data sheet. However, because the conditions of handling, use, and storage of these materials are beyond our control, we assume no responsibility or liability for personal injury or property damage incurred by the use of these materials. Rust-Oleum Corporation makes no warranty, expressed or implied, regarding the accuracy or reliability of the data or results obtained from their use. All materials may present unknown hazards and should be used with caution. The information and recommendations in this material safety data sheet are offered for the users’ consideration and examination. It is the responsibility of the user to determine the final suitability of this information and to comply with all applicable international, federal, state, and local laws and regulations.