SLV 1006837 NUMINOS S LED Pendant Lamp Instruction Manual
- June 15, 2024
- SLV
Table of Contents
SLV 1006837 NUMINOS S LED Pendant Lamp
Product Information
Specifications
- Model: NUMINOS S Pendant 48V
- Power Supply: 48 VDC
- Power Consumption: 16W
- Color Rendering Index (CRI): >90
Product Usage Instructions
Safety Advices
Read the manual carefully and keep it for further use. Disregarding the safety advices may lead to danger of life, burning, or fire. Do not alter or modify the product, fasten anything on it, or cover it. If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician. Ensure that children do not get harmed by the product and avoid staring into the active light source.
Additional Safety Advices
- Use the product as directed and only with the corresponding track system.
- Safety Class III (3): Operated with safety extra-low voltage.
- Operate the product only in dry indoor areas and avoid mechanical strain or exposure to strong dirt contamination.
Light Source
The light source of this luminaire should only be replaced by the
manufacturer, an authorized service technician, or a comparable qualified
person. The energy efficiency class of the light source can be found in the
attached data sheet.
Care / Storage
Before cleaning or storing the product, disconnect it from the mains and allow
it to cool down. Clean the external surfaces regularly with a slightly
moistened cloth. Store the product in a dry and clean place.
Installation
- Disconnect the complete system from the power supply.
- Use only the described accessories.
- Do not use force when inserting the adapter.
- When attaching luminaires, pay attention to the admissible mechanical load of the tracks.
- Insert the adapter into the track.
- Turn the knob to ON.
Adapting the Pendant (by electrician only)
- Open the adapter.
- Loosen the strain relief (A).
- Take out the board carefully.
- Loosen the wire from the clamp (B) carefully.
- Adapt the cable, prepare, tin-coat, and reconnect the wire ends.
- Insert the board.
- Secure the strain relief.
- Close the adapter.
- Carry out a continuity test after shortening the pendant cable.
Check the secure fixation and proper function of the pendant after adaptation.
FAQ
Q: Can I use this luminaire with any track system?
A: No, this luminaire should only be used with the corresponding SLV 48V
Track System.
Q: Can I replace the light source myself?
A: No, the light source should only be replaced by the manufacturer, an
authorized service technician, or a comparable qualified person.
Q: How should I clean and store the luminaire?
A: Disconnect the luminaire from the mains and allow it to cool down
before cleaning. Use a slightly moistened cloth to clean the external surfaces
regularly. Store the luminaire in a dry and clean place.
INSTRUCTION MANUAL PART A
Luminaire for SLV 48V Track System
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
Luminaire for SLV 48V Track System
NUMINOS S Pendant 48V
Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Do not stare into the active light source.
Additional safety advices =
Use as directed
Use only with corresponding track system.
Safety class III (3) – Operated with safety extra-low voltage.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class:
see attached datasheet.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
- Disconnect the complete system from the power supply.
- Use only described accessories.
- Do not use force when inserting the adapter.
- When attaching luminaires pay attention to the admissible mechanical load of the tracks.
- Insert adapter into track.
- Turn knob to “ON”.
- Adapting the pendant (only by electrician):
- Open the adapter. Loosen the strain relief(A). Take out the board carefully. Loosen the wire from the clamp(B) carefully. Adapt the cable, prepare, tin-coat and reconnect the wire ends. Insert the board.
- Secure the strain relief. Close the adapter. Carry out a continuity test after shortening pendant cable.
- Check secure fixation and proper function!
NUMINOS S Pendant 48V
SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany