SLV 1006407 Recessed Mounted Wall Light Installation Guide

June 15, 2024
SLV

SLV 1006407 Recessed Mounted Wall Light

Product Information

Specifications

  • Model: 1006406
  • Weight: 0.50 kg
  • Power: 3.2W
  • Voltage: 100V-240V ~50/60Hz
  • Luminous Flux: 45 lm
  • Colour Temperature: 3000K
  • Color Rendering Index (CRI): >80
  • Dimensions: 10 x 10 x 7 cm

Product Usage Instructions

Installation

The installation of this product requires expert knowledge and should only be carried out by an approved electrician, following local and national regulations. Please ensure that the installation is done properly to avoid any risks.

Operating Manual

  • Read the manual carefully and keep it for future reference. Failure to follow the instructions may result in danger to life, burns, or fire. Any electrical work should be performed by a qualified electrician.
  • Do not alter or modify the product in any way. Do not attach anything to the product or cover it. Operate the product only with the intact protection glass.
  • If you suspect any defects or malfunctions, discontinue use and contact your dealer or a qualified electrician.
  • Take necessary precautions to prevent children from being harmed by the product. Avoid staring directly into the active light source.

Additional Safety Advice:

  • Use the product as directed.
  • The light source of this luminaire is not replaceable. If the light source needs to be replaced (e.g., at the end of its lifetime), the entire luminaire needs to be replaced. The product contains a light source of energy efficiency class E.
  • Disconnect the product from the mains and allow it to cool down before cleaning or storing it.
  • Clean the external surfaces regularly with a slightly moistened cloth. Do not use a pressure washer.
  • Avoid exposing the product to acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, or chemicals. Store the product in a dry and clean place.

Installation:

  • Before installation, switch off the mains or fix the connection cable.
  • Use only the described accessories.
  • This product is suitable for recessed wall installation.
  • Do not cover the product, especially not with insulating materials.
  • Follow local regulations for outdoor installations.
  • Do not seal the product yourself with silicone.
  • Install the product according to the declared IP type.
  • Fix the installation pot firmly.

Electrical Connection:

  • Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
  • Equip flexible wire ends with suitable wire ferrules.
  • Connect the live conductor to Terminal L, the neutral conductor to Terminal N, and the protective conductor to the Earth terminal.
  • Secure the cable gland using a suitable tool.

FAQ:

Q: Can I replace the light source of this luminaire?

  • A: No, the light source of this luminaire is not replaceable. If the light source needs to be replaced, you will need to replace the entire luminaire.

Q: Can I clean the product with a pressure washer?

  • A: No, you should not clean the product with a pressure washer. Instead, clean the external surfaces regularly with a slightly moistened cloth.

Q: How should I store the product?

  • A: Disconnect the product from the mains and let it cool down before storing it. Store the product in a dry and clean place.

Dimension

1006406| 100V-240V ~50/60Hz| 3,2W| 45 lm| 3000K| CRI >80| 10 x 10 x 7 cm| 0,50 kg
---|---|---|---|---|---|---|---
1006407| 15 lm| 0,52 kg

Features

INSTALLATION INSTRUCTION

  • The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
  • The light source is not replaceable. The control gear is replaceable.

Operating Manual

Recessed Wall Light 1006406 …07

  • Read the manual carefully and keep it for further use!
  • Safety advice for installation and operation.
  • Disregarding may lead to danger of life, burning or fire!
  • Any work on the electrical connection only by the electrician.
  • Do not alter or modify the product.
  • Do not fasten anything on the product.
  • Do not cover the product.
  • Operate only with intact protection glass.
  • Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
  • Take measures that children are not harmed by the product.
  • Do not stare into the active light source.
  • Additional safety advice =

Use as directed

  • Safety class I (1) Connection with protective conductor.
  • Operate only firmly fixed on an even surface.
  • Operate only on normal or not inflammable surfaces.
  • Do not strain mechanically or expose to strong dirt contamination.
  • IP65: Protection against dust (dust-tight) – Protection against jetted water from all directions.
  • Admissible ambient temperature(ta): -20°C …+50°C.

Light Source

  • The light source of this luminaire is not replaceable. In case the light source must be replaced (e.g. at the end of its lifetime) the whole luminaire needs to be replaced.
  • This product contains a light source of the energy efficiency class E.

Care / Storage

  • Disconnect the product from the mains and let it cool down.
  • Clean external surfaces regularly with a slightly moistened (water) cloth.
  • Do not clean with a pressure washer.
  • The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals.
  • Store dry and clean.

Installation

  • Switch off mains / fixed connection cable!
  • Use only described accessories.
  • Only suited for recessed wall installation.
  • Do not cover, especially not with insulating materials.
  • Follow local regulations for outdoor installations.
  • Do not seal the product yourself (e.g. with silicone).
  • Install according to the declared IP type.
  • Install as shown in the figure.
  • Fix the installation pot firmly.

Electrical connection

  • Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
  • Equip flexible wire ends with suitable wire ferrules!
  • Live conductor Terminal L
  • Neutral conductor Terminal N
  • Protective conductor Earth terminal
  • Secure the cable gland by applying a suitable tool.
  • Check secure fixation and proper function!
  • 20.09.2022 © SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals