SLV 1007381 LED Module Recessed Ceiling Lights Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007381 LED Module Recessed Ceiling Lights
Product Information
- Product Name: LED Module for New Tria 68 / 75 Installation ring
- Model Numbers: 1007381, 1007382, 1007383, 1007384
- Input Voltage: 220V-240V
- Frequency: 50/60Hz
- Power Consumption: 8.3W
- Luminous Flux: 705 lm (1007381), 750 lm (1007382)
- Color Temperature: 2700K (1007381), 3000K (1007382)
- Color Rendering Index (CRI): >90
- Weight: 0.14 kg
Product Usage Instructions
- The installation of this product requires expert knowledge and should only be carried out by an approved electrician, following local and national regulations.
- Do not attempt to alter or modify the product in any way.
- Avoid fastening anything on the product and ensure it is not covered.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Ensure that children are not harmed by the product.
- Avoid staring directly into the active light source.
- This product should only be used in combination with New Tria 68 / 75 installation rings.
- The light source of this luminaire should only be replaced by the manufacturer, an authorized service technician, or a comparable qualified person.
- Disconnect the product from the mains and allow it to cool down before cleaning.
- Clean the external surfaces regularly with a slightly moistened cloth.
- Store the product in a dry and clean place.
- Before installation, switch off the mains and the fixed connection cable.
- Follow the provided installation figure for proper installation.
- Use a suitable dimmer according to the manufacturer’s instructions: Leading-edge phase dimmer (Code L) or Trailing-edge phase dimmer (Code C).
- Ensure proper electrical connection by equipping flexible wire ends with suitable wire ferrules and directing the fixed installation cable through strain relief.
- Connect the live conductor to Terminal L and the neutral conductor to Terminal N.
- If applicable, connect the green-yellow wire (protective conductor) tightly with clamp E of the product and secure strain relief.
- Make sure that the fixed installation cable is securely held by the strain relief.
installation
INSTRUCTION MANUAL PART A
LED Module for New Trial 68 / 75 Installation ring
1007381| ****
220V-240V ~50/60Hz
| ****
8,3W
| ****
705 lm
| ****
2700K
| ****
CRI >90
| ****
Ø 50 x 39 mm
| ****
0,14
kg
---|---|---|---|---|---|---|---
1007382
1007383| ****
750 lm
| ****
3000K
1007384
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations.
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
LED Module for New Tria 68 / 75 Installation ring 1007381 …82 …83 …84
Read manual carefully and keep for further use
Safety advices for installation and operation. Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product. Do not stare into
the active light source.
Additional safety advices.
Use as directed
Operate only in combination with New Tria 68 / 75 installation rings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>