SLV 1007421 LED Module For New Tria 68 75 Installation Ring Instruction Manual

INSTRUCTION MANUAL PART A
LED Module for New Tria 68 / 75 Installation ring

1007421 LED Module For New Tria 68 75 Installation Ring

1007421
1007422

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Operate only in combination with New Trial 68 / 75 installation rings.
Safety class II (2) – Safety insulated – Connection without protective conductor.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+35°C.

Light Source

The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class F.

Care / Storage

Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.

Installation

Switch off mains / fixed connection cable!
Install as shown in the figure.
Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing edge phase dimmer (Code C). Note manufacturers instructions.

Electrical connection

Equip flexible wire ends with suitable wire ferrules!
Direct the fixed installation cable through strain relief.
Live conductor→  Terminal L
Neutral conductor →  Terminal N
Connection lead with protective conductor: The green-yellow wire (protective conductor) of the connection lead has to be tightly connected with clamp E of the product.
Secure strain relief.
Ensure that the fixed installation cable is securely kept by the strain relief.
Check secure fixation and proper function!

0001 © 28.04.2023 SLV GmbH,
Daimlers. 21-23, 52531
Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>