SLV 1007350 Downlight Installation Ring without Socket Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007350 Downlight Installation Ring without Socket
Product Information
The product is a downlight installation ring without a socket,designed for recessed ceiling installation. It is suitable for use with GU10 socket or LED modules.
The product weighs 0.09 kg and has a diameter of 75 mm. It is available in two variants: A and B.
The following product codes are associated with the product:
- 1007340
- 1007341
- 1007342
- 1007343
- 1007344
- 1007349
- 1007350
- 1007351
Product Usage Instructions
Read the manual carefully and keep it for future reference.
Disregarding the instructions may result in danger to life,burning, or fire.
Do not alter, modify, fasten anything on, or cover the product.
Additional safety advices:
- Use the product only as directed.
- Operate the product only when firmly fixed on an even surface and on normal or non-inflammable surfaces.
- Operate the product only in dry indoor areas.
- Do not strain mechanically or expose the product to strong dirt contamination.
Care and Storage:
- Disconnect the product from mains and let it cool down before handling.
- Clean the external surfaces regularly with a slightly moistened cloth using water.
- Store the product in a dry and clean place.
Installation:
- Ensure the product is only used for recessed ceiling installation.
- Keep a sufficient distance from inflammable materials and ensure sufficient aeration.
- Follow the installation diagram provided.
- Check the secure fixation and proper function of the product after installation.
Refer to the user manual for further instructions in different languages.
UNPACKING
INSTRUCTION
Operating Manual PART B
- Downlight installation ring without socket
- Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Additional safety advices =
Use as directed
Use only in combination with a suitable GU10 socket or LED module.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Only suited for recessed ceiling installation.
- Keep sufficient distance to inflammable materials.
- Ensure sufficient aeration.
- Install as shown in the figure.
- Check secure fixation and proper function!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>