SLV 1007399 Recess-Mounted Ceiling Light Instruction Manual

SLV 1007399 Recess-Mounted Ceiling Light

Product Information

• Product Name: Recess-Mounted Ceiling Light
• Model Number: 1007385 …86 …87 …88 …89 …90 …91 …92 …93 …94 …93 …94 …95 …96 …97 …98 …99 …400
• Power Supply: 220V-240V ~50/60Hz
• Power Consumption: 8.3W
• Luminous Flux: 705 lm, 750 lm, 705 lm, 750lm
• Color Temperature: 2700K, 3000K, 2700K, 3000K
• Color Rendering Index (CRI): >90
• Weight: 0.20 kg
• Dimensions:
• A: 9 mm,
• B: 68 mm,
• C: 40 mm

Minimum Installation Distance:

• A: >0 cm,
• B: 10 cm,
• C: min. 5 cm

Product Usage Instructions

1. LED Driver Installation:

The installation of the LED driver requires expert knowledge and should only be carried out by an approved electrician in accordance with local and national regulations.

1. LED Replacement:

The light source (LED) of this luminaire should only be replaced by the manufacturer, an authorized service technician, or a qualified person. The energy efficiency class of the light source is F.

1. Cleaning and Storage:

Before cleaning, disconnect the product from the mains and let it cool down. Clean the external surfaces regularly with a slightly moistened cloth. Store the product in a dry and clean place.

1. Installation:
   • Switch off the mains and fix the connection cable before installation.
   • Use only the described accessories.
   • This product is suitable for recessed ceiling installation only.
   • Keep a sufficient distance to inflammable materials.
   • Ensure sufficient aeration for the product.
   • Install the product as shown in the figure provided.
   • Suitable dimmer options: Leading-edge phase dimmer (Code L) /
   • Trailing-edge phase dimmer (Code C). Follow the manufacturer’s instructions for dimmer compatibility.
2. Electrical Connection:
   • Equip flexible wire ends with suitable wire ferrules.
   • Direct the fixed installation cable through strain relief.
   • Connect the live conductor to Terminal L and the neutral conductor to Terminal N.
   • If the connection lead has a protective conductor, tightly connect the green-yellow wire (protective conductor) to clamp E of the product.
   • Secure strain relief for the cables.
   • Ensure that the fixed installation cable is securely held by the strain relief.

Please refer to the complete user manual for additional safety instructions and information.

INSTRUCTION MANUAL PART A

Recess-Mounted Ceiling Light

Specification

Precaution

Installation

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.

Operating Manual PART B
Recess-Mounted Ceiling Light
1007385 …86 …87 …88 …89 …90 …91 …92 …93 …94 …93 …94 …95 …96 …97 …98 …99 …400

Read the manual carefully and keep it for further use!
Safety advice for installation and operation.
Disregarding may lead to danger of life, burning, or fire!

• Any work on the electrical connection only by the electrician.
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• Take out of service when suspecting a defect or malfunction and contact
• your dealer or a qualified electrician.
• Take measures that children are not harmed by the product.
• Do not stare into the active light source.
• Additional safety advice =

Use as directed

• Safety class II (2) – Safety insulated – Connection without a protective conductor.
• Operate only firmly fixed on an even surface.
• Operate only on normal or not inflammable surfaces.
• Operate only in dry indoor areas.
• Do not strain mechanically or expose to strong dirt contamination.
• Admissible ambient temperature(ta): -20°C …35°C.

Light Source

The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class F.

Care / Storage

• Disconnect the product from the mains and let it cool down.
• Clean external surfaces regularly with a slightly moistened (water) cloth.
• Store dry and clean.

Installation

• Switch off mains / fixed connection cable!
• Use only described accessories.
• Only suited for recessed ceiling installation.
• Keep sufficient distance to inflammable materials.
• Ensure sufficient aeration.
• Install as shown in the figure.

Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing-edge phase dimmer (Code C).

Note the manufacturer’s instructions.

Electrical connection

• Equip flexible wire ends with suitable wire ferrules!
• Direct the fixed installation cable through strain relief.
• Live conductor Terminal L
• Neutral conductor Terminal N
• Connection leads with the protective conductor: The green-yellow wire (protective conductor) of the connection, lead has to be tightly connected with clamp E of the product.
• Secure strain relief.
• Ensure that the fixed installation cable is securely kept by the strain relief.

Check secure fixation and proper function!

• © 0001 10.05.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
• Tel. +49 (0)2451 4833-0.
• Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>