SLV 1007347 Downlight Installation Ring without Socket Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007347 Downlight Installation Ring without Socket
Product Information
- Product Code: 1007345
- Weight: 0.10 kg (A), 0.09 kg (B)
- IP Rating: IP65
- Dimensions: 68 mm
- Socket Type: GU10
- Compatible LED Modules: SLV 1007381, SLV 1007421, SLV 1007382, SLV 1007422, SLV 1007383, SLV 1007431, SLV 1007384, SLV 1007432
- Installation Type: Recessed ceiling installation
- Usage: Indoor use only
Product Usage Instructions
Safety Instructions
- Read the manual carefully and keep it for further use.
- Disregarding the safety instructions may lead to danger of life, burning, or fire.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
Additional Safety Instructions
- Use the product as directed.
- Use only in combination with a suitable GU10 socket or LED module.
- Operate the product only when firmly fixed on an even surface.
- Operate the product only on normal or non-inflammable surfaces.
- Operate the product only indoors.
- Do not strain mechanically or expose the product to strong dirt contamination.
- IP65 rating provides protection against dust (dust-tight) and protection against jetted water from all directions.
Care and Storage
- Disconnect the product from the mains and let it cool down before performing any maintenance.
- Clean the external surfaces regularly with a slightly moistened cloth.
- Store the product in a dry and clean place.
Installation
- The product is suitable for recessed ceiling installation into dry cavities.
- Keep a sufficient distance from inflammable materials.
- Ensure sufficient aeration during installation.
- Install the product as shown in the figure provided in the manual.
- Check for secure fixation and proper function after installation.
DIMENSIONS
PARTS
INSTALLATION INSTRUCTIONS
Operating Manual PART B
- Downlight installation ring without socket
Read the manual carefully and keep it for further use!
- Safety advice for installation and operation.
- Disregarding may lead to danger of life, burning, or fire!
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Additional safety advice =
Use as directed
- Use only in combination with a suitable GU10 socket or LED module.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only indoors.
- Do not strain mechanically or expose to strong dirt contamination.
- IP65: Protection against dust (dust-tight) – Protection against jetted water from all directions.
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Only suited for recessed ceiling installation into dry cavities.
- Keep sufficient distance from inflammable materials.
- Ensure sufficient aeration.
- Install as shown in the figure.
- Check secure fixation and proper function!
CONTACT
- 0001 26.04.2023 © SLV GmbH, Daimlerstr
- 21-23, 52531 Übach-Palenberg, Germany,
- Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>