SLV 1007382 LED Module for New Tria 68 Instruction Manual
- June 13, 2024
- SLV
Table of Contents
1007382 LED Module for New Tria 68
INSTRUCTION MANUAL PART A
LED Module for New Tria 68 / 75 Installation ring 
1007381| 220V-240V ~50/60Hz| 8,3W| 705 lm| 2700K| CRI>90| Ø 50 x 39 mm| 0,14
kg
---|---|---|---|---|---|---|---
1007382
1007383| 750 lm| 3000K
1007384
1007381 , 1007382,, 1007383 ,1007384 ,
The installation requires expert knowledge and may be carried out only by an
approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control
unit is only exchangeable by a professional.
SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
Operating Manual PART B
LED Module for New Tria 68 / 75 Installation ring
1007381 …82 …83 …84
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Operate only in combination with New Tria 68 / 75 installation rings.
Safety class II (2) 
– Safety insulated – Connection
without protective conductor.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.Admissible
ambient temperature(ta): -20°C …+35°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class F.
Care / Storage
**** Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
**** Switch off mains / fixed connection cable!
Install as shown in the figure.
Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailingedge phase
dimmer (Code C).
Note manufacturers instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Direct the fixed installation cable through strain relief.
Live conductor → Terminal L
Neutral conductor → Terminal N
Connection lead with protective conductor: The green-yellow wire (protective
conductor) of the connection lead has to be tightly connected with clamp E of
the product.
Secure strain relief.
Ensure that the fixed installation cable is securely kept by the strain
relief.
**** Check secure fixation and proper function!
0001 © 10.05.2023 SLV GmbH, Daimlerstr.
21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0.
Made in China.