SLV 1007385 …86 Recess Mounted Ceiling Light Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007385 …86 Recess Mounted Ceiling Light
Product Information
- Model Number: 1007385 …86 …87 …88 …89 …90 …91 …92 …93 …94 …93 …94 …95 …96 …97 …98 …99 …400
- Power Supply: 220V-240V ~50/60Hz
- Power Consumption: 8.3W
- Luminous Flux: 705 lm, 750 lm, 705 lm, 750 lm
- Color Temperature: 2700K, 3000K, 2700K, 3000K
- Color Rendering Index (CRI): >90
- Weight: 0.20 kg
- Dimensions: A – 9 mm, B – 68 mm, B – 40 mm
- Minimum Distance for Installation: >0 cm, 10 cm, min. 5 cm
- LED Driver: PRI, SEC
- Light Source: LED
Product Usage Instructions
- The installation of this product requires expert knowledge and should only be carried out by an approved electrician in compliance with local and national regulations.
- The light source of this luminaire should only be replaced by the manufacturer, an authorized service technician, or a qualified person.
- Before performing any work on the electrical connection, ensure that the mains power is switched off and contact a qualified electrician.
- Do not alter or modify the product in any way.
- Do not fasten anything on the product or cover it.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Ensure that children are not harmed by the product.
- Avoid staring directly into the active light source.
- Disconnect the product from the mains and allow it to cool down before cleaning or storing.
- Clean the external surfaces regularly with a slightly moistened cloth.
- Store the product in a dry and clean place.
- When installing the product, switch off the main power and use only the described accessories.
- This product is suitable for recessed ceiling installation only.
- Keep a sufficient distance between the product and inflammable materials.
- Ensure adequate ventilation for the product.
- Follow the installation diagram provided with the product.
- The recommended dimmer types for this product are leading-edge phase dimmer (Code L) or trailing-edge phase dimmer (Code C). Refer to the manufacturer’s instructions for compatibility.
- When making electrical connections, use suitable wire ferrules for flexible wire ends.
- Direct the fixed installation cable through the strain relief.
- Connect the live conductor to Terminal L and the neutral conductor to Terminal N.
- If the product has a connection lead with a protective conductor, securely connect the green-yellow wire (protective conductor) to clamp E of the product.
- Ensure proper strain relief for the cable and securely fasten it using the strain relief.
Specification
What’s in the box
INSTRUCTION MANUAL PART A Recess-Mounted Ceiling Light
Installation
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
Recess-Mounted Ceiling Light 1007385 …86 …87 …88 …89 …90 …91 …92 …93 …94 …93 …94 …95…96 …97 …98 …99 …400
Read the manual carefully and keep it for further use!
Safety advice for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Do not stare into the active light source.
Additional safety advice =
Use as directed
- Safety class II (2) Safety insulated – Connection without a protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
- Admissible ambient temperature(ta): -20°C …35°C.
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class F.
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Only suited for recessed ceiling installation.
- Keep sufficient distance to inflammable materials.
- Ensure sufficient aeration.
- Install as shown in the figure.
- Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing-edge phase dimmer (Code C). Note the manufacturer’s instructions.
Electrical connection
- Equip flexible wire ends with suitable wire ferrules!
- Direct the fixed installation cable through strain relief.
- Live conductor Terminal L
- Neutral conductor Terminal N
- Connection lead with the protective conductor: The green-yellow wire
- (protective conductor) of the connection, lead has to be tightly connected with clamp E of the product.
- Secure strain relief.
- Ensure that the fixed installation cable is securely kept by the strain relief.
Check secure fixation and proper function!
- © 0001 10.05.2023
- SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
- Tel. +49 (0)2451 4833-0.
- Made in China.
Read User Manual Online (PDF format)
Loading......