SLV 1007374 Recess Mounted Ceiling Light Instruction Manual

SLV 1007374 Recess Mounted Ceiling Light

Product Information

• Product Name: Recess-Mounted Ceiling Light
• Model Numbers: 1007374, 1007375, 1007376, 1007377, 1007378, 1007379
• Lamp Type: LED
• Lamp Socket Type: GU10
• Maximum Wattage: 10W
• Weight: 0.12 kg (1007374, 1007375, 1007376), 0.13 kg (1007377, 1007378, 1007379)
• Dimensions: A – 75 mm x 65 mm, B – 9 mm
• Minimum Distance from Surface: >0 cm
• Minimum Distance between Lamps: 5 cm
• Safety Class: Class II (2)
• Safety Features: Safety insulated, connection without protective conductor

Product Usage Instructions

1. Safety Precautions:
   • Read the manual carefully and keep it for future reference.
   • Failure to follow the instructions may result in danger to life, burns, or fire.
   • All electrical work should be carried out by a qualified electrician.
   • Do not modify or alter the product.
   • Do not fasten anything on or cover the product.
   • If a defect or malfunction is suspected, discontinue use and contact your dealer or a qualified electrician.
   • Take precautions to prevent children from getting harmed by the product.
2. Lamp Replacement:
   • Disconnect the luminaire from the mains and allow it to cool down.
   • Only use LED lamps with a GU10 socket and a maximum wattage of 10W.
3. Care and Storage:
   • Disconnect the product from the mains and allow it to cool down before cleaning.
   • Clean the external surfaces regularly with a slightly moistened cloth (water).
   • Store the product in a dry and clean place.
4. Installation:
   • Switch off the mains power or fixed connection cable before installation.
   • Use only the described accessories for installation.
   • The product is suitable for recessed ceiling installation only.
   • Maintain a sufficient distance from inflammable materials.
   • Ensure proper ventilation around the product.
   • Install the product as shown in the provided figure.
5. Electrical Connection:
   • Equip flexible wire ends with suitable wire ferrules.
   • Direct the fixed installation cable through the strain relief.
   • Connect the live conductor to Terminal L and the neutral conductor to Terminal N.
   • If the connection lead has a protective conductor, tightly connect the green-yellow wire to clamp E of the product.
   • Secure the strain relief to keep the fixed installation cable in place.
   • Check that the product is securely fixed and functioning properly.

Note:
The provided information is based on the text extracted from the user manual and may not cover all details. Please refer to the complete user manual for comprehensive instructions and safety guidelines.

Specification

1007374 …75 …76| 220V – 240V ~50/60Hz| LED| GU10| 10W max.| Ø 9,3 x 2,6 cm| 0,12 kg
---|---|---|---|---|---|---
1007377 …78 …79| 9 x 9 x 2,6 cm| 0,13 kg

Features

• The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Manual PART B Recess-Mounted Ceiling Light
1007374 …75 …76 1007377 …78 …79

Safety

• Read the manual carefully and keep it for further use!
• Safety advice for installation and operation.
• Disregarding may lead to danger of life, burning, or fire!
• Any work on the electrical connection only by the electrician.
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
• Take measures that children are not harmed by the product.
• Additional safety advice

Use as directed

• Safety class II (2) – Safety insulated – Connection without a protective conductor.
• Operate only firmly fixed on an even surface.
• Operate only on normal or not inflammable surfaces.
• Operate only in dry indoor areas.
• Do not strain mechanically or expose to strong dirt contamination.

Lamp replacement

• Disconnect the luminaire from the mains and let it cool down.
• Suitable light sources: LED, GU10, 10W max.

Care/Storage

• Disconnect the product from the mains and let it cool down.
• Clean external surfaces regularly with a slightly moistened (water) cloth.
• Store dry and clean.

Installation

• Switch off mains/fixed connection cable!
• Use only described accessories.
• Only suited for recessed ceiling installation.
• Keep sufficient distance from inflammable materials.
• Ensure sufficient aeration.
• Install as shown in the figure.

Electrical connection

• Equip flexible wire ends with suitable wire ferrules!
• Direct the fixed installation cable through strain relief.
  • Live conductor –> Terminal L
  • Neutral conductor –> Terminal N
• Connection lead with protective conductor: The green-yellow wire (protective conductor) of the connection lead has to be tightly connected with clamp E of the product.
• Secure strain relief.
• Ensure that the fixed installation cable is securely kept by the strain relief.

Check secure fixation and proper function!

© 0001 12.04.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>