SLV 1007316 Wall And Ceiling Light Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007316 Wall And Ceiling Light
Product Information
Product Code | Product Description |
---|---|
A | 1007316 …17 …18 1007319 …20 …21 1007322 …23 …24 |
1007325 …26 …27
B| 1007322 …23 …24 1007325 …26 …27 (2x)
Product Specifications
Specification | Value |
---|---|
IP Rating | IP50 |
Wattage | 12W (A), 20W (B) |
Lumen Output | 1050 lm / 1100 lm / 1200 lm (2700K / 3000K / 4000K) (A), 2100 |
lm / 2200 lm / 2350 lm (2700K / 3000K / 4000K) (A), 4050 lm / 4250
lm / 4550 lm (2700K / 3000K / 4000K) (A), 8300 lm / 8700 lm / 9350
lm (2700K / 3000K / 4000K) (B)
Weight| 2.00 kg (A), 4.60 kg (A), 79W (B)
Voltage| 220V-240V ~50/60Hz
CRI| CRI>90
Product Usage Instructions
Installation:
- Switch off mains / fixed connection cable before installation.
- Use only described accessories and suitable fastening materials.
- Product A, it is suited for wall and ceiling surface mounting. Product B, it is suited for ceiling surface mounting.
- Install the product according to the declared IP type.
- Refer to the provided figure for installation guidance.
- Make sure to use a suitable dimmer (Trailing-edge phase dimmer with Code C) if applicable. Follow the manufacturer’s instructions for dimmer usage.
Electrical Connection:
- Equip flexible wire ends with suitable wire ferrules.
Light Source Replacement:
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician, or a comparable qualified person.
- This product contains a light source of energy efficiency class D.
- The reference control setting for this product is 4000K.
Care and Storage:
- Disconnect the product from the mains and let it cool down before cleaning.
- Clean external surfaces regularly with a slightly moistened cloth (water).
- Store the product in a dry and clean place.
Safety Precautions:
- Read the manual carefully and keep it for further use.
- Disregarding safety advice may lead to danger of life, burning, or fire.
- Any work on the electrical connection should only be carried out by an approved electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product or cover it.
- If you suspect a defect or malfunction, take the product out of service and contact your dealer or a qualified electrician.
- Take measures to ensure that children do not get harmed by the product.
- Avoid staring into the active light source.
INSTRUCTION MANUAL PART A Wall- and Ceiling Light
Specification
1007316 …17 …18|
220V-240V
~50/60Hz
| 12W| 1050 lm / 1100 lm / 1200 lm (2700K / 3000K / 4000K)|
CRI >90
|
ta: -20°C
…+30°C
| Ø 28 x 9,2
cm
| 1,50
kg
---|---|---|---|---|---|---|---
1007319 …20 …21| 20W| 2100 lm / 2200 lm / 2350 lm
(2700K / 3000K / 4000K)
| Ø 38 x 9,2
cm
| 2,00
kg
1007322 …23 …24| 39W| 4050 lm / 4250 lm / 4550 lm (2700K / 3000K / 4000K)|
ta: -20°C
…+40°C
| Ø 60 x 9,2
cm
| 4,60
kg
1007325 …26 …27| 79W| 8300 lm / 8700 lm / 9350 lm
(2700K / 3000K / 4000K)
| Ø 90 x 9,2
cm
| 9,00
kg
Tools
Symbols
Installation
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations! The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B
Wall- and Ceiling Light
- 1007316 …17 …18 1007319 …20 …21
- 1007322 …23 …24 1007325 …26 …27
Read the manual carefully and keep it for further use!
Safety advice for installation and operation. Disregarding may lead to danger of life, burning, or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Do not stare into the active light source.
- Additional safety advice =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
- IP50: Protection against disturbing dust deposition – No protection against water.
- 1007316 …17 …18 1007319 …20 …21:
- Admissible ambient temperature (ta): -20°C …+30°C
- 1007322 …23 …24 1007325 …26 …27:
- Admissible ambient temperature (ta): -20°C …+40°C
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class D.
- Reference control setting: 4000K
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- 1007316 …17 …18 1007319 …20 …21 1007322 …23 …24
- Only suited for wall and ceiling surface mounting. 1007325 …26 …27
- Only suited for ceiling surface mounting.
- Install according to the declared IP type.
- Install as shown in the figure.
- Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note manufacturers instructions.
Electrical connection
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
Check secure fixation and proper function!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>