SLV 1007385 …86 Recess Mounted Ceiling Light Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SLV 1007385 …86 Recess Mounted Ceiling Light
SPECIFICATION
FEATURES
INSTALLATION INSTRUCTION
- The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
- The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Technical Details are subject to change.
Operating Manual PART B
Recess-Mounted Ceiling Light
- 1007385 …86 …87 …88 …89 …90 …91 …92 …93 …94 …93 …94 …95 …96 …97 …98 …99 …400
Read the manual carefully and keep it for further use!
Safety advice for installation and operation. Disregarding may lead to danger
of life, burning or fire! Any work on the electrical connection only by the
electrician. Do not alter or modify the product. Do not fasten anything on the
product. Do not cover the product. Take out of service when suspecting a
defect or malfunction and contact your dealer or a qualified electrician. Take
measures that children are not harmed by the product. Do not stare into the
active light source. Additional safety advice =
Use as directed
Safety class II (2) Safety insulated – Connection without a protective
conductor. Operate only firmly fixed on an even surface. Operate only on
normal or not inflammable surfaces. Operate only in dry indoor area. Do not
strain mechanically or expose to strong dirt contamination. Admissible ambient
temperature(ta): -20°C …35°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person. This
product contains a light source of the energy efficiency class F.
Care / Storage
Disconnect the product from the mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Only suited for recessed ceiling installation.
- Keep sufficient distance to inflammable materials.
- Ensure sufficient aeration.
- Install as shown in the figure.
- Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing-edge
- phase dimmer (Code C). Note the manufacturer’s instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Direct the fixed installation cable through strain relief.
- Live conductor Terminal L
- Neutral conductor Terminal N
Connection lead with protective conductor: The green-yellow wire (protective conductor) of the connection lead has to be tightly connected with clamp E of the product. Secure strain relief. Ensure that the fixed installation cable is securely kept by the strain relief.
- Check secure fixation and proper function!
- 0001 10.05.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China