SLV SHELL 30 Wall Light White LED Instruction Manual
- June 13, 2024
- SLV
Table of Contents
SHELL 30 Wall Light White LED
1000422| 220V-240V ~50/60Hz| 15W| 1400 lm| 3000K| CRI>80| 12,6 x 7 x 16 cm|
0,89 kg
---|---|---|---|---|---|---|---
1000423| 54W| 5600 lm| 28,6 x 7 x 16 cm| 1,77 kg
INSTRUCTION MANUAL PART A Wall Light
1000422
1000423
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control
unit is only exchangeable by a professional.
Disposal (European Union)
Do not dispose the product with the regular household waste! Products marked with this sign must be disposed according to the directive (WEEE) on electrical and electronic devices at local collection points for such devices!
Operating Manual PART B
Wall Light
1000422 …23
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact
your dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class I (1) -Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Light Source
The light source of this luminaire may only be replaced by the
manufacturer, an authorized service technician or a comparable qualified
person.
This product contains a light source of the energy efficiency class D.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for wall surface mounting.
Install as shown in the figure.
Install only with light exit pointing up.
Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note manufacturers
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Equip wires of the fixed wiring with protective tubes.
Live conductor → Terminal L
Neutral conductor → Terminal N
Protective conductor → Earth terminal
Check secure fixation and proper function!
© 01.05.2021 SLV GmbH, Daimlerstr.
21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0.
Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>