Ford 2021 Head and Tail Lamps Installation Guide
- June 13, 2024
- Ford
Table of Contents
Ford 2021 Head and Tail Lamps
Instruction For Use
WARNING:
Head and Tail Lamp circuits must not be modified orreconfigured in any way
when using the factory supplied lamps. If using after market Head or Tail
Lamps, or if circuits are modified or reconfigured, the vehicle alterer
assumes all responsibility for vehicle compliance to lighting related
regulations.
Head Lamp Pin Out
Mating Connector: 10 way Male – Molex 33482-1601
Functions (4)
| Pin#| Wire Color| Circuit Type| Max Current (2)
Low Beam| 1| RH: BU/ N LH: BN / BU| Non-PWM|
4.2A
Turn
| 2| RH: YE/ VT LH: BU/ GN| Non-PWM|
2.2 A
Turn Lamp Outage
| 4| RH: BU/ WT
LH: YE/ GN| N/A| N/A
Lin Network| 5| YE/ VT| Network|
N/A
Daytime Running Lights
| 7| RH: VT /WT LH: GY / BU| Non-PWM| 2.3 A
High Beam| 8| RH:BU/GY
LH: YE/ VT| Non-PWM|
2OA Fu seed
Park
| 9| RH: BN / YE
LH: GN / OG| Non-PWM| 1.OA
Ground| 10| RH: BK/ GY LH:BK/GN| N/A|
N/A
Notes
- Combined Load for RH and LH Lamps
- Continuous at 12V
- Tail Lamp circuits are reconfigurable between separated and combined Stop and Turn*
- Head Lamp circuit functions are reconfigurable in various ways
Requires a certified service technician with
a Ford Diagnosis and Repair System (FORS) tool.
Tail Lamp Pin Out HALOGEN
Mating Connector 6 way Male – Molex 33482-3602
Function
| Pin#| Wire Col or| Ci rcu it Type| Max Current (2)
Reverse| 4| GN/BN| PWM|
3.9A (1)
Park
| 2| BU/GY| PWM| 1.6 A{l)
Stop /Turn (3)| 3| RH: GY /vrLH:wH/GN| PWM|
1.9 A
Ground
| 1| BK /GY| N/A|
6.8 A
Tail Lamp Pin Out LED
Mating Connector 6 way Male- Molex 33482-3602
Function
| Pin#| Wire Col or| Circuit Type (3)| Max Current (2)
Reverse| 4| GN/BN| Non-PWM|
3.9A (1)
Park
| 2| BU/GY| Non-PWM| 1.6 A(l)
Stop (3)| 3| RH:BU/BN LH: BU/ GN| Non-PWM|
1.9 A
Turn (3)
| 5| RH: GN/ OG
LH: GY / OG| Non-PWM| 1.9 A
Turn Lamp
Outage| 6| RH: BU/ OG
LH:GN/ BU| N/A|
N/A
Ground
| 1| BK/GY| N/A|
6.8 A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>