FORD PERFORMANCE M-16628-FG Raptor OEM Real Carbon Fiber Hood Vent Installation Guide

May 15, 2024
Ford Performance

FORD PERFORMANCE M-16628-FG Raptor OEM Real Carbon Fiber Hood Vent

FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-
product

  • Part Number: M-16628-FG/FM
  • Part Description: F150 RAPTOR CARBON FIBER HOOD VENT INSTALLATION INSTRUCTIONS

NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF FORD PERFORMANCE PARTS. Techline 1-800-367-3788 Page 1 of 6 IS-M-16628-FG/FM 121923 Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356 Please visit www.performanceparts.ford.com for the most current instruction information

PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE INSTALLATION. AT ANY TIME, IF YOU DO NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE FORD PERFORMANCE TECH LINE AT 1-800-367-3788!

Kit Contents

Quantity Part Name
1 Hood Scoop
1 RH Trim Panel
1 LH Trim Panel
20 Clips
2 Raptor Emblems
4 Nuts, Emblem
6 M6, T-Studs
6 Nuts, Scoop to Hood

Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356

INSTALLATION INSTRUCTION

  1. Remove the retainer and position the conductor strap aside.
  2. Remove the retainers and hood insulation.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-2
  3. Remove 4 nut covers.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-3
  4. Remove 6 nuts.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-4
  5. Compress retention clips where there is accessibility. Use non-marring tools to pry up the scoop starting from a back corner working around to the front and the opposite side.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-5
  6. Once the front is lifted, use a razor blade to cut the adhesive tape.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-6
  7. Use non-marring tool to remove both Trim Panels.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-7
  8. Clean surfaces before installing new parts.
  9. Install the supplied Raptor emblems, nuts and attaching clips.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-8
  10. Start by installing the Trim Panels, then the Scoop. Remove the adhesive tape covering and install parts using minimal pressure to press in clips.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-10
  11. Install the supplied 6 Scoop nuts, original 4 nut covers and hood insulation.FORD-PERFORMANCE-M-16628-FG-Raptor-OEM-Real-Carbon-Fiber-Hood-Vent-fig-11

Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals