Ford F150 Radio Upgrade Instruction Manual
- May 14, 2024
- Ford
Table of Contents
Ford F150 Radio Upgrade Instruction Manual
TOOLS REQUIRED FOR DISASSEMBLY
- Cable package
- Protocol box
- Installation bracket
- Installation tools
Disassembly:
- Loosen the two screws above the air conditioning control panel and pry open the clips on both sides of the air outlet. Next, lever out the USB module beneath the control panel, unplug the connecting wires, and finally, unscrew the screws securing the air conditioning control panel.
2. Take out the air conditioning control panel, unplug the corresponding wires, unscrew the 4 screws holding the main unit, and disconnect the wires attached to the main unit.
PROPOSE
Before starting the replacement job, you should prepare tools such as a plastic pry tool and a screwdriver, and make sure the car’s power is cut off during the installation.
Installation
(If the wiring harness does not match, please contact customer service to request the correct wiring harness)
COMPARATION
Effect of Installation
GENTLE REMINDERS
Due to the complexity of the product structure, you may encounter some problems during installation. If you still have any questions about the installation after reading this manual, you can contact usand we will respond to you within 24 hours. Don’t worry; we will do our best to solve the problem for you until you are satisfied.
After-sales email:[email protected]
WARN FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation
Read More About This Manual & Download PDF: