FORD 417-01 Exterior Lighting 2017 MKX Instruction Manual
- October 30, 2023
- Ford
Table of Contents
FFORD 417-01 Exterior Lighting 2017 MKX
Product Information
The 417-01 Exterior Lighting Removal and Installation procedure is designed
for the 2017 MKX model. The procedure revision date is 06/8/2015. This
procedure is specifically for the removal and
installation of the headlamp bulb.
Headlamp Bulb Removal
- Remove the headlamp assembly by referring to the Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation) instructions.
- Remove the screws and position the ballast.
- Disconnect the electrical connectors and remove the ballast.
- Disconnect the headlamp bulb electrical connector.
- Remove the headlamp bulb by squeezing the tabs together, lifting up, and releasing the spring retainers.
Headlamp Bulb Installation
- To install, reverse the removal procedure.
Note: It is recommended to refer to the Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation) instructions before performing the headlamp bulb removal and installation procedure.
For further information or assistance, please visit https://www.fordtechservice.dealerconnection.com
Removal
- Remove the headlamp assembly. Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
- Remove the screws and position the ballast.
- Disconnect the electrical connectors and remove the ballast
- Disconnect the headlamp bulb electrical connector.
- Remove the headlamp bulb.
- Squeeze the tabs together lift up and release the spring retainers.
- Remove the headlamp bulb.
Installation
To install, reverse the removal procedure
References
Read User Manual Online (PDF format)
Loading......