SHARP M380HL Ceiling Mounted and Desktop Installation Guide

SHARP M380HL Ceiling Mounted and Desktop Installation Guide

Product Description

• Type: 1-Chip DLP Projector 0.65” DMD

• Resolution: M380HL: 1920 x 1080
  M430WL: 1280 x 800

• Fan Noise: 34dB / 31dB @ 1 meter

• Power Consumption: 250W (max) / 240W (typical)

• Dimensions: 13.3” (W) x 4.7” (H) x 10.4” (D)

• Weight: 9.7 lbs

• Brightness: M380HL: 3800 Lumens
  M430WL: 4300 Lumens

• BTU’s: 853 BTU/hour

Lens Specifications

• Throw Ratio: M380HL: 1.4 – 2.2:1 (for 100” diagonal)
  M430WL: 1.5 – 2.3:1 (for 100” diagonal)

• Offset Angle: M380HL: 7.7° – 15.4° (for 100” diagonal)
  M430WL: 7.6° – 15.4° (for 100” diagonal)

• Screen Sizes: 30” – 300” diagonal (16:9)
  30” – 300” diagonal (16:10)

• Focal Length: M380HL: 19.2mm – 23.0mm
  M430WL: 17.4mm – 29.0mm

• F/#: 2.5 – 3.26

Screen Sizes: 30” – 300” diagonal (16:9) Manual Focus/Manual Zoom/Manual Lens Shift

Notes

• For screen sizes not indicated on the projection tables, use the formulas below. If the figures on the tables do not match the results of formulas, use the figures in the table.
• All calculations are based on a 16:9 or 16:10 aspect ratio.
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.

Formulas: 16:9 Aspect Ratio

The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on:

Definitions:
W = Image Width
H = Image Height (size)
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and screen top (screen bottom for desktop application)

16:9 1080p Screen Formulas:
W = Image Width = H x 16/9
H = Image Height = W x 9/16
Screen Diagonal = W x 18.358/16

Projection Formulas:
C (wide) = 1.4W
C (tele) = 2.24W
Vertical Lens Shift Max (Down) = -0.54H
Vertical Lens Shift Max (Up) = 0.69H
α (wide) = tanˉ¹ (B/C(wide))
α (tele) = tanˉ¹ (B/C(tele))

Note: For screen sizes not indicated on the projection

Screen Size (16:9)| Cw ide – tele| Vertical Lens Shif t Range (A)| Vertical Lens Shif t Range (B)| αw ide – tele (Lens Shif t Min)| αw ide – tele (Lens Shif t Max)
---|---|---|---|---|---
Diagonal| Width(W)| Height (H)| Min| | Max| Min| | Max
inches| inches| inches| inches| inches| inches| degrees| degrees
30| 26| 15| 36.6| –| 58.6| 7.9| –| 10.1| 0.6| –| 2.8| 12.2| –| 7.7| 15.5| –| 9.8
40| 35| 20| 48.8| –| 78.1| 10.6| –| 13.5| 0.8| –| 3.7| 12.2| –| 7.7| 15.5| –| 9.8
50| 44| 25| 61.0| –| 97.6| 13.2| –| 16.9| 1.0| –| 4.7| 12.2| –| 7.7| 15.5| –| 9.8
60| 52| 29| 73.2| –| 117.1| 15.9| –| 20.3| 1.2| –| 5.6| 12.2| –| 7.7| 15.5| –| 9.8
70| 61| 34| 85.4| –| 136.7| 18.5| –| 23.7| 1.4| –| 6.5| 12.2| –| 7.7| 15.5| –| 9.8
80| 70| 39| 97.6| –| 156.2| 21.2| –| 27.1| 1.6| –| 7.5| 12.2| –| 7.7| 15.5| –| 9.8
90| 78| 44| 109.8| –| 175.7| 23.8| –| 30.4| 1.8| –| 8.4| 12.2| –| 7.7| 15.5| –| 9.8
100| 87| 49| 122.0| –| 195.2| 26.5| –| 33.8| 2.0| –| 9.3| 12.2| –| 7.7| 15.5| –| 9.8
120| 105| 59| 146.4| –| 234.3| 31.8| –| 40.6| 2.4| –| 11.2| 12.2| –| 7.7| 15.5| –| 9.8
150| 131| 74| 183.0| –| 292.8| 39.7| –| 50.7| 2.9| –| 14.0| 12.2| –| 7.7| 15.5| –| 9.8
180| 157| 88| 219.6| –| 351.4| 47.7| –| 60.9| 3.5| –| 16.8| 12.2| –| 7.7| 15.5| –| 9.8
200| 174| 98| 244.0| –| 390.5| 52.9| –| 67.7| 3.9| –| 18.6| 12.2| –| 7.7| 15.5| –| 9.8
240| 209| 118| 292.8| –| 468.5| 63.5| –| 81.2| 4.7| –| 22.4| 12.2| –| 7.7| 15.5| –| 9.8
270| 235| 132| 329.4| –| 527.1| 71.5| –| 91.3| 5.3| –| 25.1| 12.2| –| 7.7| 15.5| –| 9.8
300| 261| 147| 366.1| –| 585.7| 79.4| –| 101.5| 5.9| –| 27.9| 12.2| –| 7.7| 15.5| –| 9.8

The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in  the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on:

Definitions:
W = Image Width
H = Image Height (size)
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and screen top (screen bottom for desktop application)

16:10 WXGA Screen Formulas:
W = Image Width = H x 16/10
H = Image Height = W x 10/16
Screen Diagonal = W x 18.868/16

Projection Formulas:
C (wide) = 1.47W
C (tele) = 2.35W
Vertical Lens Shift Max (Down) = -0.5H
Vertical Lens Shift Max (Up) = 0.65H
α (wide) = tanˉ¹ (B/C(wide))
α (tele) = tanˉ¹ (B/C(tele))

Note: For screen sizes not indicated on the projection

Screen Size (16:10)| Cw ide – tele| Vertical Lens Shif t Range (A)| Vertical Lens Shif t Range (B)| αw ide – tele (Lens Shif t Min)| αw ide – tele (Lens Shif t Max)
---|---|---|---|---|---
Diagonal| Width(W)| Height (H)| Min| | Max| Min| | Max
inches| inches| inches| inches| inches| inches| degrees| degrees
30| 25| 16| 37.4| –| 59.8| 7.9| –| 10.3| 0.0| –| 2.4| 12.0| –| 7.6| 15.4| –| 9.8
40| 34| 21| 49.9| –| 79.7| 10.6| –| 13.8| 0.0| –| 3.2| 12.0| –| 7.6| 15.4| –| 9.8
50| 42| 26| 62.3| –| 99.6| 13.2| –| 17.2| 0.0| –| 4.0| 12.0| –| 7.6| 15.4| –| 9.8
60| 51| 32| 74.8| –| 119.6| 15.9| –| 20.7| 0.0| –| 4.8| 12.0| –| 7.6| 15.4| –| 9.8
70| 59| 37| 87.3| –| 139.5| 18.5| –| 24.1| 0.0| –| 5.6| 12.0| –| 7.6| 15.4| –| 9.8
80| 68| 42| 99.7| –| 159.4| 21.2| –| 27.6| 0.0| –| 6.4| 12.0| –| 7.6| 15.4| –| 9.8
90| 76| 48| 112.2| –| 179.4| 23.8| –| 31.0| 0.0| –| 7.2| 12.0| –| 7.6| 15.4| –| 9.8
100| 85| 53| 124.7| –| 199.3| 26.5| –| 34.4| 0.0| –| 7.9| 12.0| –| 7.6| 15.4| –| 9.8
120| 102| 64| 149.6| –| 239.1| 31.8| –| 41.3| 0.0| –| 9.5| 12.0| –| 7.6| 15.4| –| 9.8
150| 127| 79| 187.0| –| 298.9| 39.7| –| 51.7| 0.0| –| 11.9| 12.0| –| 7.6| 15.4| –| 9.8
180| 153| 95| 224.4| –| 358.7| 47.7| –| 62.0| 0.0| –| 14.3| 12.0| –| 7.6| 15.4| –| 9.8
200| 170| 106| 249.3| –| 398.6| 53.0| –| 68.9| 0.0| –| 15.9| 12.0| –| 7.6| 15.4| –| 9.8
240| 204| 127| 299.2| –| 478.3| 63.6| –| 82.7| 0.0| –| 19.1| 12.0| –| 7.6| 15.4| –| 9.8
270| 229| 143| 336.6| –| 538.1| 71.5| –| 93.0| 0.0| –| 21.5| 12.0| –| 7.6| 15.4| –| 9.8
300| 254| 159| 374.0| –| 597.8| 79.5| –| 103.3| 0.0| –| 23.8| 12.0| –| 7.6| 15.4| –| 9.8

Diagrams M430WL/M380HL

The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation.

Top View

Side View

Cabinet Dimensions

The following drawings show the cabinet dimensions.
Dimensions are in millimeters. For inches divide by 25.4.

Optional Universal Ceiling Mount Dimensions (Model #: NP01UCM)

The following drawings show the ceiling mount dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.

Note: Actual parts may appear slightly different than illustrated

Input Output Panel

PC Control Codes

• Function: Code Data
• POWER ON: 02H 00H 00H 00H 00H 02H
• POWER OFF: 02H 01H 00H 00H 00H 03H
• INPUT SELECT COMPUTER: 02H 03H 00H 00H 02H 01H 01H 09H
• INPUT SELECT HDMI 1: 02H 03H 00H 00H 02H 01H 1AH A9H
• INPUT SELECT HDMI 2: 02H 03H 00H 00H 02H 01H A2H AAH
• INPUT SELECT VIDEO: 02H 03H 00H 00H 02H 01H 06H 0EH
• PICTURE MUTE ON: 02H 10H 00H 00H 00H 12H
• PICTURE MUTE OFF: 02H 11H 00H 00H 00H 13H
• SOUND MUTE ON: 02H 12H 00H 00H 00H 14H
• SOUND MUTE OFF: 02H 13H 00H 00H 00H 15H

Cable Connection

Communication Protocol:

• Baud Rate: 38400 bps
• Data Length: 8 bits
• Parity: No Parity
• Stop Bit: One Bit
• X on/off: None
• Communications: Full duplex

PC Control Connector (D-Sub 9P)

NOTE 1: Pins 1, 4, 6, and 9 are not used inside the projector.
NOTE 2: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.

References

• LCD Displays, Projectors, Desktop Monitors, Digital Signage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>