XINLEI PR14 Projector Ceiling Mount Compatible Instruction Manual
- May 15, 2024
- XINLEI
Table of Contents
XINLEI PR14 Projector Ceiling Mount Compatible
Product Information
Specifications
- Model: PR14
- Cable Management: Yes
- Recommended Tool: Stud Finder
- Materials: Concrete, Wood, Masonry
- Parts Included: Screws for projector, Various components labeled from A to K
Product Usage Instructions
Installation Guidelines
- Read through ALL instructions before commencing assembly.
- Use a stud finder to locate suitable mounting points on the ceiling.
- Different materials may require specific tools for installation (e.g., masonry may need a 10mm drill bit).
- Ensure all boxed parts are available before starting the assembly process.
Assembly Steps
- Identify the type of ceiling you are mounting the product on (e.g., concrete, wood).
- Refer to the labeled components (A to K) for the specific assembly instructions.
- Follow the recommended steps for attaching the projector using the provided screws.
- Avoid over-tightening screws to prevent damage to the product or mounting surface.
Safety Precautions
- Ensure the ceiling can support the weight of the projector and mounting hardware.
- Avoid mounting the product near electrical wires or fixtures to prevent accidents.
- If unsure about any step, contact customer services for assistance.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter issues during assembly?
A: Contact the customer services help line for guidance before returning
the product to the store.
Q: Do I need any additional tools for installation?
A: The stud finder is recommended for locating suitable mounting points.
Specific tools may be needed based on the ceiling material.
Read through ALL instructions before commencing assembly.
If you have any questions about this product or issues with assembly contact
the customer services help line before returning this product to the store.
Retain all packaging in case the bracket needs to be returned.
Contents may vary from photography illustrations.
You will not need all these parts, so expect there to be some left over
depending upon the specification of your projector
- This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury. It is the responsibility of the installer to ensure that the mounting surface is of a suitable standard and void of any services (eg gas, electricity, water etc).
Tool recommend
ASSEMBLY INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>