QCY HT05 Melobuds ANC Truly Wireless Earbuds User Manual

HT05 Melobuds ANC Truly Wireless Earbuds
User Manualhttps://mapp.qcymall.com/qcyearphones/zh/download/qcy

For a better user experience, please scan to download QCY APP before start-up.

Overview

Choose Eartips Please try medium eartips first as they fit most people.

How to Connect

First-Time Connection:

1. Pick up both earbuds, pop them back in the case then the close lid to activate them.
2. Open the lid, pick up the earbuds and they will auto-power on. On phone, search QCY Melobuds ANC and tap to connect.

How to Switch Connection Between Two Devices Push earbuds into the case, open the lid and keep pressing the charging case button for 3s or until LEDs on the earbuds blink white. Then pick up earbuds. On-device, search QCY-HT05 and tap to connect.

• Earbuds cannot get connected to two phones at the same time. They will auto-reconnect to the last phone in the connectivity record if any. The above pictures are for reference only and practical items may vary.

Factory Setting

1. Push the earbuds into the case, open the lid, and keep pressing the charging case button for 10s to set the earbuds to factory on the earbuds blinking white 5 times).
2. After the factory setting, earbuds will auto pair with each other and turn connectable to the phone when picked up.

Charging Earbuds
LED will glow solid red when earbuds are charged and turn white for the 30s when topped up.
Charging Case
LED will glow solid red when the case is charged and turn solid white when topped up.

How to Wear

1. Please put on earbuds properly then adjust them to fit yourself.
2. Set the microphone towards your mouth.
3.  It will cause a bad calling or listening experience to wear them in the wrong way.
   

LED on Case
Battery level of case > 20% (white) Battery level of case < 20% (Red)

Function

| Power-on: Keep pressing the touch panel for 1.5s
Power-off: Push earbuds into the case
Answer/end call: Double press touch panel |
Ignore call: Keep pressing the touch panel for 1.5s
Skip track forward: Triple press right touch panel
Voice assistant: Triple press left touch panel
Playback/pause: Double press the left/right touch panel to play/pause
Gaming mode: Keep pressing the left touch panel for 1.5s
ANC mode: Keep pressing the right touch panel for 1.5s to switch between ANC, Normal and Transparency modes
---|---

Warranty Card

Warranty Period 12 months after you purchase this item (or you may inquire with your local shopper for more details). Free Service: Supposing any defects caused by quality issues occurring within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number:

Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:

Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return it to us or your distributor for free repair.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet the general RF exposure requirements.

Part
Name| Hazardous Substances
---|---
Pb| Hg| Cd| Cr
(VD| PBB| PBDE| DIBP| DEHP| DBP| BBP
Main body| X| 0| 0| 0| 0| 0| 0| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0
Ear tips| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0
Accessories| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0
Charging
cable| X| 0| 0| 0| 0| 0| 0| 0| 0| 0
This form is made by SJ/T 11364 regulation.
0: means that hazardous substance content in the homogeneous materials of this part is within the limits of the (EU) 2015/863 regulation.
X: means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of (EU) 2015/863 regulation, but there is no mature alternative in the industry at present, it still conforms to the EU ROHS Directive in the scope of the exemption.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time. Manufacturer: Dongguan Hele Electronics Co., Ltd. Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

Tips

1. Before using the earbuds, please read the manual carefully and keep it for future reference.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds are left unused for over two weeks. please recharge.
4. Please use the chargers made by a qualified manufacturer.
5. If the earbuds cannot be found by your phone, please check whether they are In pairing mode; if left unconnected for a long while, the earbuds will exit pairing mode, Please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the earbuds occurs, reboot or reset it.

Caveats

1. Never disassemble or modify your earbuds for any reason to avoid any damage and danger.
2. Do not store the earbuds in extreme temperatures (under 0°C or over 45°C1.
3. Avoid using the indicator close to the eyes of children or animals. 4. Do not use the earbuds during a thunderstorm to avoid dysfunction and increased risk of electric shock. 5. Do not use harsh chemicals or strong detergents to clean the earbuds. Note: please do not use earbuds for a long time as may damage your hearing.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>