ROADSAFE BT014 Auxiliary Battery Tray Instruction Manual
- June 13, 2024
- ROADSAFE
Table of Contents
ROADSAFE BT014 Auxiliary Battery Tray
Product Information
- Vehicle: Toyota Prado 120
- Model Year: 2003 – 2011
- Product: Auxiliary Battery Tray
- Product Code: BT014
The Battery Tray is designed to fit into the front of the right-hand driver side of the vehicle under the bonnet. It is compatible with N70zz 12-inch case batteries. The Battery Tray comes with the following components:
- 1 x 6mm bolt & washers
- 2 x 4mm bolts
- 1 x Hold Down with J Hooks
Product Usage Instructions
-
Situate the Battery Tray into position, ensuring that the support leg on the left side of the vehicle is aligned properly.
-
Secure the Battery Tray by inserting the provided 6mm bolt through the support leg on the left side.
-
Locate the two holes on the right side of the tray’s base.
These holes should align with two threaded holes in the skirt. -
Insert the provided 4mm bolts into these threaded holes and tighten all bolts to secure the tray in place.
-
Place the battery into the tray, ensuring it fits properly.
-
Attach and tighten the battery hold down using the provided hold down with J Hooks.
Contact Information:
A division of Specialist Wholesalers Pty. Ltd.
ABN 64 163 280 279
VIC PH: 03 8687 1700 | QLD PH: 07 3737 7420
Email: sales@roadsafe.com.au
INSTALLATION
- Battery Tray fits into the front of the right-hand driver side of the vehicle under the bonnet.
- Sit Battery Tray into position; the support leg to the left of the vehicle requires a 6mm bolt.
- The two holes to the right of the tray, in the base of the tray, have support legs which sit over two threaded holes in the skirt. Fit 2 x 4mm bolts into these threads and tighten all bolts.
- Sit battery in tray. Fit battery hold down and tighten.
A division of Specialist Wholesalers Pty. Ltd. ABN 64 163 280 279
VIC PH: 03 8687 1700 | QLD PH: 07 3737 7420 | Email:
sales@roadsafe.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>