AUTOFREE NJK02C105 Side Steps Running Board User Manual
- June 1, 2024
- AUTOFREE
Table of Contents
AUTOFREE NJK02C105 Side Steps Running Board
Product Information
Specifications:
- Model: NJK02C105
- Material: Q235A
- Product Dimensions: 69 x 8.5 x 4.7 inches
- Package Dimensions: 72 x 11.8 x 10.2 inches
- Product Weight: 23.5 lbs
Product Usage Instructions
Required Tools:
- Socket
- Ratchet
- Safety Glasses
Parts Information:
| Parts Name | Size | Qty | Color |
|---|---|---|---|
| Side Step L/R | 1 | Black | |
| Front & Mid Brackets L & R | 2 | Black | |
| Rear Brackets L & R | 1 | Black | |
| Support Brackets L & R | 3 | Black |
Installation Instructions:
-
* **Step 1:** Open the carton and take out the parts. Check whether the number of components is complete.- Step 2: Differentiate the direction of side step and brackets.
- Step 3: Install the Brackets.
- Step 4: Install the Side Step.
FAQ
- Q: Are spare parts included with the product?
- A: Yes, spare parts such as B42, W30, W31, and N25 are provided with 2 pieces each and are included in the number of parts details.
Thank you for purchasing the SIDE STEP. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number,and our support team will help you solve your problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION:
Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged
REQUIRED TOOLS
Parts Information
- Note : spare parts such as B42, W30, W31 and N25 are provided with 2PCS each (included in the number of parts details).
Installation Instructions
Note : This installation manual takes a single side as a sample, please repeat the steps for the other side.
- Step 1 : Open the carton and take out the parts. Check whether the number of components is complete.
- Step 2 : Differentiate the direction of side step and brackets
- Step 3 : Install the Brackets.
- Step 4 : Install the Side Step.
- Step 5 : Adjust the balance of the Side Step and the car side, and tighten the corresponding bolts.
- Step 6 : Adjust the balance of the pedal to the ground and tighten the corresponding bolts.
- Tips : Use a stretch ruler to measure and balance the left and right sides of the pedal. Please ensure that the pedal has the same distance to the ground on both sides.
- Step 7 : Installation of a Side Step is complete. Please do periodic inspections of the Side Step to make sure that all hardware is secure and tight.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>