ROADSAFE RPNAV22 Recovery Tow Points Instructions
- June 13, 2024
- ROADSAFE
Table of Contents
ROADSAFE RPNAV22 Recovery Tow Points Instructions
FITTING INSTRUCTIONS
Fitted to D22 Navara
- Fitted to factory retained nuts on both L/H & R/H sides.
- Install 12mm Spacer Plates (one per point) to provide clearance on angled chassis gusset.
- The tow point mounting holes are slightly elongated to allow tolerance for different country of origin re. chassis/vehicle manufacture.
- Ensure two bolts per tow point are fitted and torqued to recommended settings to ensure tow points meet tested standards.
Fitted to 200 Series Toyota LandCruisers
- The RPNAV22 has an additional mount hole to make this item suitable for fitment to the200 Series Landcruiser. The 12mm Spacer Plates should not be required for the fitment of these tow points to the 200 Series.
- The kits do NOT include the nuts required to secure the M12x1.25 bolts. You will have to provide these yourself if fitting to a 200 Series Landcruiser.
Bolt Torque Specs
| 8.8| 10.9| 12.9
---|---|---|---
M10| 41-60 Nm| 59-85 Nm| 65-94 Nm
M12| 71-105 Nm| 102-150 Nm| 114-164 Nm
M14| 112-168 Nm| 161-240 Nm| 182-265 Nm
M16| 175-260 Nm| 250-371 Nm| 282-406 Nm
Ensure all supplied and specified components are used during the installation
of tow points. Failure to do so will significantly reduce the Working Load
Limit (WLL) specified for each individual point, which can result in serious
injury or death. IMPORTANT NOTE
Always use tow points as a matched pair teamed with an equalising bridle
during any recovery situation.
Hardware supplied
- 4 x M12x1.25 bolts
- 4 x M12 flat washers
- 4 x M12 spring washers
- 2 x 12mm spacer plates
Rated to 5000kgs per tow point
Documents / Resources
|
ROADSAFE RPNAV22 Recovery Tow
Points
[pdf] Instructions
RPNAV22 Recovery Tow Points, RPNAV22, Recovery Tow Points, Tow Points, Points
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>