Ford 2021 Bronco Installation Guide

Ford 2021 Bronco

Product Information

The product referred to in the user manual is the SYNC Module [APIM] for the 2021 Bronco. It is a component of the information and entertainment system of the vehicle.

Removal Procedure

1. Remove the information and entertainment display unit. Refer to: Center Display Screen (415-00 Information and Entertainment System – General Information, Removal and Installation).
2. Disconnect the electrical connectors.
3. Remove the screws and the APIM.

For detailed instructions with diagrams, please refer to the user manual.

Installation Procedure

1. To install, follow the reverse of the removal procedure.
2. If a new APIM is being installed, program the APIM to the correct software level. Refer to: SYNC Module [APIM] Programming (415-00 Information and Entertainment System – General Information, General Procedures).

For detailed instructions with diagrams, please refer to the user manual.

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the information and entertainment display unit.
   Refer to: Center Display Screen (415-00 Information and Entertainment System – General Information, Removal and Installation).

2. Disconnect the electrical connectors.

3. Remove the screws and the APIM.

Installation

1. To install, reverse the removal procedure.
2. If a new APIM is being installed, program the APIM to the correct software level.
   Refer to: SYNC Module [APIM] Programming (415-00 Information and Entertainment System – General Information, General Procedures).

© Copyright 2022, Ford Motor Company.

https://www.fordtechservice.dealerconnection.com/publication/p…nstallation%3A%3ASYNC%20Module%20%5BAPIM%5D&goToHash=#G2199074

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>