AVIANCE Lighting HD29248 Newburgh 2 Light Black Semi Flush Mount Installation Guide
- June 13, 2024
- AViANCE lighting
Table of Contents
AVIANCE Lighting HD29248 Newburgh 2 Light Black Semi Flush Mount
Product Information
- Product Model: HD29248
- Product Name: AVIANCE Fixture
- Product Specifications: This AVIANCE Fixture is designed for installation in junction boxes. It includes a glass shade, a single bar, a pipe, a canopy, and necessary hardware for installation. The fixture requires light bulbs (not included) and supports a specified wattage (do not exceed).
- Manufacturer: AVIANCE Lighting
Contact Information: For assistance with parts or assembly, please email customer service at info@aviancelighting.net
Product Usage Instructions
- Before starting the installation process, shut off the power at the circuit breaker box to ensure safety.
- Remove the old fixture and all hardware from the junction box.
- Carefully unpack the new fixture and lay out all the parts on a clear area, taking care not to lose any small parts necessary for installation.
- Attach the mounting screw partway into the side hole of the single bar and lock it securely with the hex nut. Attach the single bar to the junction box using two box screws. Ensure that the side of the single bar marked GND faces out.
- Align the pipe’s hole with hooks on the glass shade. Attach the screw and secure the connection with the hex nut. Adjust the angle and position of the other end of the pipe to fit the holes on the canopy and secure it with the big hex cap nut.
- Connect the electrical wires as shown in Fig.2. Ensure that all wire nuts are secured. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate with the green screw provided. After connecting the wires, tuck them carefully inside the junction box.
- Raise the shade assembly onto the junction box, aligning the screws on the single bar with the mounting holes in the canopy. Lock it securely with the ball nuts.
- Install the light bulbs (not included) in accordance with the fixture specifications. Do not exceed the specified wattage.
- Once installation is complete, return power to the junction box and test the fixture.
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.
- WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
- ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Attach the mounting screw part way into the side hole of the single bar, then lock it securely with hex nut until becoming. Attach the single bar to the junction box using two box screws as shown. The side of the single bar marked “GND” must face out. The junction box is not included.
- Align the pipe’s (C) hole with hooks on the glass shade, attach screw (E) and secure the connection with hex nut (D), then adjust the angle and position of the other end of the pipe to fit the holes on canopy (A) and secure it with the big hex cap nut.
- While holding the shade assembly towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise connect fixture’s ground wire directly to the mounting plate with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box.
- Raise the shade assembly onto the junction box, aligning screws on single bar with mounting holes in canopy(A) and lock it securely with the ball nuts(B).
- Install the light bulbs (Not included) in accordance with the fixture specifications.
NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
Thank you for purchasing an AVIANCE product. Need assistance with parts or assembly? Please email customer service at:info@aviancelighting.net
- COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>