hp 9020e Series OfficeJet Pro User Guide
- June 8, 2024
- HP
Table of Contents
hp 9020e Series OfficeJet Pro
Setup Guide
-
Remove all tape and packaging material.
-
Plug in to automatically power on. Select language and country/region.
-
Open the front door and then lift the cartridge access door by the scanner lid. Unpack cartridges.
-
Insert each cartridge securely into the indicated slot. Close both doors.
Note: Make sure to use the cartridges provided with the printer for setup .
-
Open the paper tray. Slide out the front length-guide, remove the cardboard, and slide out the width-guides. Load Letter or A4 paper and adjust the guides. Close the tray and pull open the output tray extender.
-
Use the control panel to print and scan the alignment page.
-
Install the required HP Smart software from 123.hp.com or your app store on a computer or mobile device.
-
Follow instructions in HP Smart to connect the printer to a network and activate HP+ features.
If connecting the printer to Wi-Fi, your computer or mobile device must be near the printer during setup. See Reference Guide for Wi-Fi troubleshooting and tips.
Get help with setup
Find setup information and videos online.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
© Copyright 2021 HP Development Company, L.P.
Printed in Thailand