AViANCE Lighting HD54578 12 Inch 1-Light Polished Chrome ADA Wall Sconce Installation Guide

June 1, 2024
AViANCE lighting

AViANCE Lighting HD54578 12 Inch 1-Light Polished Chrome ADA Wall Sconce

AViANCE-Lighting-HD54578-12-Inch-1-Light-Polished-Chrome-ADA-Wall-Sconce-
PRODUCT

Product Information

Specifications

  • Model: HD54578
  • Product Type: Light Fixture
  • Power Source: Electric
  • Usage: Indoor
  • Manufacturer: AVIANCE

Product Usage Instructions

Assembling the Fixture

  1. Shut off the power at the circuit breaker box and remove the old fixture along with all hardware from the Junction Box.
  2. Unpack the new fixture carefully and lay out all parts on a clear surface.
  3. Ensure that the fixture is not installed upside down.

Connecting the Wires

  1. Connect the electrical wires:
    • Black wire from the fixture to the black house (hot) wire.
    • White wire from the fixture to the white (neutral) house wire.
    • If there are ground wires in the outlet box, connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
  2. Tuck the wire connections neatly into the wall junction box.

Your installation is now complete. Restore power to the junction box and test the fixture for functionality.

FAQ

Q: Can this fixture be installed outdoors?

  • A: No, this fixture is designed for indoor use only.

Q: What should I do if I encounter flickering lights after installation?

  • A: Check the connections to ensure they are secure. If flickering persists, contact customer service for assistance.
  • Thank you for choosing AVIANCE products. For any further assistance with parts or assembly, please contact our customer service at info@aviancelighting.net.

ASSEMBLING & INSTALLATION INSTRUCTIONS

  • The drawing shown may not exactly match the product enclosed.
  • However, the installation instructions do apply to this product.
  • WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

ASSEMBLING THE FIXTURE (Fig.1)AViANCE-Lighting-HD54578-12-Inch-1-Light-
Polished-Chrome-ADA-Wall-Sconce-FIG-1

  1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
  2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
  3. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
  4. Guide fixture wires through the hole in the center of the mounting plate.
  5. Follow wiring instructions carefully (see Fig. 2).
  6. Attach the lamp body (B) onto the mounting plate, aligning the back plate holes with the screw hole of the mounting plate inside, then lock it securely with mounting screw(C). Put the candle sleeve(D) and insert the lamp holder.
  7. Install the light bulb(not included) under the fixture’s specifications.
    • NOTE: DO NOT EXCEED THE MAXIMUN WATTAGE RATING!
  8. Put the glass(A) and insert the cover of the lamp holder.
  9. WARNING: THIS LAMP CANNOT BE UPSIDE DOWN!

CONNECTING THE WIRES (Fig.2)AViANCE-Lighting-HD54578-12-Inch-1-Light-
Polished-Chrome-ADA-Wall-Sconce-FIG-2

  1. Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wire (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
  2. Tuck the wire connections neatly into the wall junction box.
    Your installation is now complete. Return power to the junction box and test the fixture.
  • Thank you for purchasing an AVIANCE product.
  • Need assistance with parts or assembly? Please email customer service at: info@aviancelighting.net
  • ©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING, INC.

Documents / Resources

| AViANCE Lighting HD54578 12 Inch 1-Light Polished Chrome ADA Wall Sconce [pdf] Installation Guide
HD54578, HD54578 12 Inch 1-Light Polished Chrome ADA Wall Sconce, 12 Inch 1-Light Polished Chrome ADA Wall Sconce, 1-Light Polished Chrome ADA Wall Sconce, Polished Chrome ADA Wall Sconce, Chrome ADA Wall Sconce, ADA Wall Sconce, Wall Sconce, Sconce
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AViANCE lighting User Manuals

Related Manuals