GUANGDONG GT300 High Quality Repeater User Manual

GUANGDONG GT300 High-Quality Repeater

Product Information

Specifications

• Model: KP300
• Compliance: FCC Part 15
• Operating Conditions: Uncontrolled environment
• Radiation Exposure Limits: FCC-compliant
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Safety Precautions

Please read and follow these safety precautions to ensure safe and proper usage of the KP300:

• Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer. Doing so may void your authority to operate the equipment.
• Ensure that the device is operated within the guidelines of the FCC Part 15, which states that the device should not cause harmful interference and must accept any interference received.
• Install and operate the equipment with a minimum distance of 20cm between the radiator and your body. This is to comply with FCC radiation exposure limits.

Installation

Follow these steps for proper installation of the KP300:

1. Select a suitable location for the device, ensuring it is placed in an uncontrolled environment.
2. Ensure that a minimum distance of 20cm is maintained between the radiator and your body.
3. Connect the necessary cables and power source to the device.
4. Power on the device and wait for it to initialize.

Operation

To operate the KP300, please follow these instructions:

1. Ensure that the device is properly installed and powered on.
2. Familiarize yourself with the device interface and controls.
3. Refer to the user manual for specific functions and features of the device.
4. Follow the recommended operating procedures provided by the manufacturer.
5. If any issues or concerns arise during operation, refer to the troubleshooting section of the user manual or contact customer support.

Maintenance

To maintain the KP300 and ensure its longevity, please adhere to the following guidelines:

• Regularly clean the device using a soft, dry cloth.
• Avoid exposing the device to extreme temperatures or humidity.
• Do not attempt to disassemble or repair the device yourself.
• Contact authorized service personnel for any maintenance or repair needs.

Frequently Asked Questions (FAQ)

Q: Can I modify the KP300?

• A: No, any changes or modifications to the device not explicitly approved by the manufacturer may void your authority to operate the equipment.

Q: What are the FCC compliance requirements for the KP300?

• A: The KP300 complies with FCC Part 15, which states that the device should not cause harmful interference and must accept any interference received.

Q: How far should I keep the KP300 from my body?

• A: The KP300 should be installed and operated with a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.

REPEATER MODE

1. Step 1 Plug the Wi-Fi repeater in the socket directly cellphone Setting WLAN Then click it.
2. Step 2 Select the language “English”, then click “Log in.
3. Step 3 Select the Repeater Mode Please input 192.168.18.1 in your browser if it cannot automatically open the page for a few model phones.
4. Step 4 Select your stronger router wifi signal. Please click “Refresh” if the page cannot be displayed.
5. Step 5 Input the password of your extended router wifi. (The password is your original wifi password)
6. Step 6 Then click “NEXT” and “Finish Setting” You will get a new wifi named Plus Finally, you can use this new wifi in the future.

AP MODE

1. Step 1 Plugging wifi repeater in the socket directly (Donot connect with cable), research the KP300 in your cellphone Setting WLAN Then click it.
2. Step 2 Select the language English then click LOGIN”
3. Step 3 Select the AP Mode Please input 192.168.18.1 in your browser if it cannot automatically open the page for a few model phones.
4. Step 4 You can change and set a new wifi name and password on the page.
5. Step 5 Click NEXT” and Finish”, then you can connect to the router and wifi repeater’s wlan with a cable. Finally, all devices can use the wifi signal.

FAQs

1. Q: What should I do if I cannot access the Repeater’s web management page?
2. A : Make sure your computer is connected to the extended network.
3. A : Make sure your computer is set to obtain an IP address automatically.
4. A : If the Repeater has connected to the router, you should go to your router’s DHCP client list to obtain the Repeater’s current IP address.
5. A : Reset the Repeater
6. Q: Why does the wireless transmission rate speed down, while the wireless signal is stronger after being repeated by the Repeater?
7. A: In compliance with the wireless transmission protocol, all the Repeater devices are set to work in half-duplex instead of full-duplex mode, In other words, the Repeater has to process one-way communication between your root Wireless router (or AP) and the terminal clients; so the transmission time will be double-increased, while the speed will be decreased. Recommends that vou connect to the extender when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones”
8. Q: Why the devices connected to the Repeater cannot get an IP address from the Repeater and cannot access the Internet?
9. A: Maybe you enabled a wireless MAC filter, wireless access control, or access control list (ACL) on your router. To solve this problem, please log into your router and disable the MAC filter, wireless access control, or ACL.
10. A: Maybe the Repeater has not been successfully connected to your router, please reset the Repeater and Reconfiguration.
11. A: Maybe the IP address of the router is occupied or the wireless device connected by the router has reached the limit. please reboot your router, then reset the Repeater and Reconfiguration.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>