PARKSIDE PBMK 30 B2 Wood Burning Tool Set Instruction Manual

PARKSIDE PBMK 30 B2 Wood Burning Tool Set

Product Information

The product is a branding iron designed for marking and inscribing wood, leather, and cork with the help of heated metal stamps or heated tips. It is intended exclusively for private, non-commercial use in dry indoor areas. The package contents include 1 branding iron, 1 storage stand, 1 set of 7 stamp tips, 1 set of 7 writing and drawing tips, and 1 set of operating instructions. The technical specifications of the product are as follows:

• Rated voltage: N/A
• Rated frequency: N/A
• Rated power consumption: N/A
• Max. working temperature: N/A

Product Usage Instructions

Before using the product, familiarize yourself with all operating and safety instructions provided in the manual. Follow the below instructions for safe and effective usage of theproduct:

1. Ensure that the product is suitable for your intended use and is used only as described and for the specified range of applications.
2. Ensure that the appliance is only used in dry indoor areas and not for commercial purposes.
3. Ensure that children under the age of 8 do not use th eappliance as a toy and that any user with limited physical, sensory, or mental capabilities is supervised.
4. Avoid applying excessive pressure on the tips during use to prevent bending. Careless use of the appliance can cause a fire.
5. Ensure that the mains cable does not come into contact with heat, oil or sharp edges to avoid short circuits and electric shocks.
6. Remove any flammable objects, liquids, and gases from the working area of the appliance before use. Keep your work area clean and tidy to help prevent accidents.
7. Before use, always check that the tool tip is properly fitted into the appliance and keep the hot tool tip and its fitting away from skin, hair, etc. to prevent burns.
8. After use, place the appliance on its stand and allow it to cool down before putting it away. Do not leave the appliance unattended while it is in operation.
9. When the appliance is not in use, store it in a safe place away from dust.

Product Introduction

Congratulations on the purchase of your new appliance. You have selected a highquality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the specified range of applications. Please also pass these operating instructions on to any future owner.

Intended use

This branding iron is intended exclusively for private, non-commercial use in dry indoor areas. It is designed for marking and inscribing wood, leather and cork with the help of heated metal stamps or heated tips. Use this appliance only as described and for the areas of applications specified. Any other usage of or modification to the appliance is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

Equipment

1. Branding iron
2. Mains plug
3. Tip
4. Storage stand (fig. A)
5. Stamp tips (fig. B)
6. Writing and drawing tips (fig. C)

Package contents

• 1 branding iron
• 1 storage stand (fig. A)
• 1 set of 7 stamp tips (fig. B)
• 1 set of 7 writing and drawing tips (fig. C)
• 1 set of operating instructions

Technical specifications

• Rated voltage 230 V ∼ (alternating current)
• Rated frequency 50 Hz
• Rated power consumption 30 W
• Max. working temperature approx. 550°C

Safety

Safety information
WARNING!

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
  This appliance is suitable for indoor use only.

• This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.

• To avoid potential risks, a damaged mains cable should be replaced by the manufacturer or the manufacturer’s customer service department or a similarly qualified person.
  CAUTION – RISK OF ELECTRIC SHOCK! Do not use the appliance if the handle, the mains cable or the plug are damaged. Never open the appliance!

Residual risks

• Do not apply excessive pressure on the tips during use. The thin tips can bend under pressure.
• Careless use of the appliance can cause a fire.
• Make sure that the mains cable does not come into contact with heat, oil or sharp edges. Damaged mains cables can cause fires, short circuits and electric shocks.
• Remove any flammable objects, liquids and gases from the working area of the appliance before use. To help prevent accidents, keep your work area clean and tidy.
• Before use, always check that the tool tip is properly fitted into the appliance. Keep the hot tool tip and its fitting away from skin, hair, etc. Risk of burns.
• After use, place the appliance on its stand and allow it to cool down before putting it away.
• Do not leave the appliance unattended while it is in operation.
• When the appliance is not in use, store it in a safe place away from dust and moisture.
• Check the appliance for damage. If you discover any damage, do not use the appliance!
• Ensure adequate ventilation during use. Make sure that you do not inhale any toxic vapours or gases. Wear protective clothing.
• Disconnect the appliance from the power source during longer work breaks.
• Observe all national and international safety, health and occupational health regulations.

Before use

Fitting/changing the tips
CAUTION! RISK OF BURNS!

• Never heat the branding iron 1 without a tip 3.
  • Tips 3 should only be removed when the appliance is unplugged and once the tip 3 has cooled down.
  • The tips 3 have a screw thread and can therefore be quickly and easily removed from the branding iron 1.
  • Unscrew the tip 3 anticlockwise.
  • Screw in the tip 3 clockwise.

Using the appliance

Switching on/off

Switching on

• Insert the mains plug 2 into a suitable mains wall socket.

Switching off
NOTE

• After use, always replace the branding iron 1 onto its storage stand 4 (see fig. A).
  • Always remove the plug 2 from the socket when not in use and allow the branding iron 1 to cool down.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always pull the mains plug out of the mains socket and let the appliance
cool down before you carry out any work on the appliance.

• Always clean the appliance after completion of work.
• To clean the housing, use a cloth and a mild detergent if necessary.
• Never use sharp objects, petrol, solvents or cleaning agents that can damage plastic.
• Do not allow any liquids to get into the interior of the appliance.

NOTE

• You can order spare parts (such as tips) via our Service Hotline.

Disposal

Do not dispose of power tools in the normal domestic waste!
The adjacent symbol of a crossed-out wheelie bin means that this appliance is subject to Directive 2012/19/EU. This directive states that this appliance may not be disposed of in the normal household waste at the end of its useful life, but must be taken to specially set-up collection locations, recycling depots or disposal companies. This disposal is free of charge for the user. Protect the environment and dispose of this appliance properly. Your local community or municipal authorities can provide information on how to dispose of the worn-out product. Do not dispose of batteries in your normal household waste!
Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Batteries/rechargeable batteries must be treated as hazardous waste and must therefore be disposed of in an environmentally sound manner by appropriate bodies (dealers, specialist dealers, public municipal bodies, commercial disposal companies). Batteries/rechargeable batteries may contain toxic heavy metals.
For this reason, do not dispose of batteries/rechargeable batteries in domestic waste.
Take them to a specialist collection point. Dispose of batteries only when they are fully discharged. The packaging is made from environmentally friendly material which can be disposed of at your local recycling plant.
Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal, if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1–7: plastics, 20–22: paper and cardboard, 80–98: composites.

warranty

Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of pur-chase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be con-sidered as consumable parts such as switches or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

The warranty period does not apply to

• Normal reduction of the battery capacity over time
• Commercial use of the product
• Damage to or alteration of the product by the customer
• Non-compliance with safety and maintenance instructions, operating errors
• Damage caused by natural hazards

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (IAN) 389431_2201 available as proof of purchase.
• You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
• If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page (www.lidl- service.com) where you can open your operating instructions by entering the item number (IAN) 389431_2201.

Service

Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk

Service Ireland
Tel.: 1800 101010
E-Mail: kompernass@lidl.ie
IAN 389431_2201

Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
For EU market
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
For GB market
Lidl Great Britain Ltd
Lidl House 14 Kingston Road
Surbiton
KT5 9NU

Declaration of conformity

Original declaration of conformity

We, KOMPERNASS HANDELS GMBH, document officer: Mr Semi Uguzlu, BURGSTR.
21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with thefollowing standards, normative documents and EC directives:

EC Low Voltage Directive
(2014/35/EU)

Electromagnetic Compatibility
(2014/30/EU)
RoHS Directive
(2011/65/EU)*

• The manufacturer bears the sole responsibility for compliance with this conformity declaration. The subject of the declaration described above meets the requirements of Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
  Applied harmonised standards

  • EN 60335-1:2012/A2:2019
  • EN 60335-2-45:2002/A2:2012
  • EN 55014-1:2017/A11:2020
  • EN 55014-2:1997/A2:2008
  • EN IEC 55014-1:2021
  • EN IEC 55014-2:2021
  • EN IEC 61000-3-2:2019/A1:2021
  • EN 61000-3-2:2014
  • EN 61000-3-3:2013
  • EN 61000-3-3:2013/A1:2019
  • EN IEC 61000:2018
  • EN 62233:2008
  • Type designation of the machine: Wood Burning Tool Set PBMK 30 B2
  • Year of manufacture: 05–2022
  • Serial number: IAN 389431_2201

Semi Uguzlu
– Quality Manager –
We reserve the right to make technical changes in the context of further product development.
This mark confirms that the product complies with the product safety requirements applicable in the UK.

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

References

• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>