AVIANCE lighting 14422 Lighting Beckford Instruction Manual
- June 1, 2024
- AViANCE lighting
Table of Contents
AVIANCE lighting 14422 Lighting Beckford
Product Specifications
- Model: HD82908
- Power: Requires connection to a standard electrical junction box
- Installation: Hardwired, requires mounting to a junction box
- Bulb Requirement: Compatible with specified light bulbs, not included
Product Usage Instructions
Assembling the Fixture:
- Turn off the power at the circuit breaker box.
- Remove old fixture and hardware from the Junction Box.
- Unpack the new fixture carefully and lay out all parts in a clear area.
- Thread mounting screws into the pre-drilled holes on the mounting plate and attach it to the junction box using provided screws.
- Guide fixture wires through the hole in the center of the mounting plate.
- Attach the back plate of the lamp body onto the junction box and secure it with ball nuts.
- Install light bulbs according to the fixture’s specifications, ensuring not to exceed the maximum wattage rating.
Connecting the Wires:
- Connect Black fixture wire to the black house (hot) wire, and white fixture wire to the white (neutral) house wire. Secure connections with wire nuts and electrical tape if needed.
- If your outlet box has a ground wire, connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck wire connections neatly into the wall junction box.
Your installation is now complete. Restore power to the junction box and test the fixture.
Frequently Asked Questions (FAQ):
-
Q: What should I do if I lose some small parts during installation?
A: If you lose any small parts necessary for installation, please contact customer service at info@aviancelighting.net for assistance in obtaining replacements. -
Q: Can I use bulbs other than those specified?
A: It is recommended to use light bulbs that meet the fixture’s specifications to ensure proper functioning and safety. Using bulbs that exceed the maximum wattage rating may cause damage.
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the
installation instructions do apply to this product.
HD82908
- WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
- ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Thread the two mounting screws about 1/4” into the pre-drilled holes in the mounting plate, spaced about the same distance apart as the holes in the fixture back plate. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the single bar marked “GND” must face out. The junction box is not included.
- Guide fixture wires through hole in center of mounting plate. Follow wiring instructions carefully (see fig.2).
- Attach the back plate of the lamp body onto the junction box, aligning the back plate’s hole with mounting screw and lock it securely with the ball nuts.
- Install the light bulbs(Not included) in accordance with the fixture’s specifications. DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction box and test
the fixture. 
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:
info@aviancelighting.net
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.
Documents / Resources
|
AVIANCE lighting 14422 Lighting
Beckford
[pdf] Instruction Manual
14422 Lighting Beckford, 14422, Lighting Beckford, Beckford
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>