BEGA 50607.1 Wall Luminaire Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 50607.1 Wall Luminaire
Product Information
Product Usage Instructions
DIMENSIONS
Product Description
Safety
Installation
Cleaning · Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50607.1 Wall Luminaire

Product Information

This product is a luminaire that requires installation and operation according to national safety regulations. It is recommended to have a qualified electrician carry out the installation and commissioning. The manufacturer does not accept liability for damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer. The electronic components in the luminaire are protected against overvoltage in accordance with DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website at www.bega.com.

The product has different specifications based on the module designation, color temperature, color rendering index (CRI), module luminous flux, luminaire luminous flux, and luminaire luminous efficiency. Please refer to the table below for the specific values:

Module Designation| Color Temperature| Color Rendering Index (CRI)| Module Luminous Flux| Luminaire Luminous Flux| Luminaire Luminous Efficiency
---|---|---|---|---|---
2x LED-0551/927| 2700 K| CRI > 90| 1540 lm| 1084 lm| 87.4 lm/W
2x LED-0551/930| 3000 K| CRI > 90| 1590 lm| 1120 lm| 90.3 lm/W

The product also has spare parts available, including spare glass, LED power supply unit, LED module 2700 K, LED module 3000 K, and a gasket. The part numbers for these spares are as follows:

Spare glass: 11 002 798 .0R G
LED power supply unit: DEV-0194/370
LED module 2700 K: LED-0551/927
LED module 3000 K: LED-0551/930
Gasket: 83 001 249

Product Usage Instructions

To use the luminaire, follow these instructions:

Ensure that the luminaire is installed and commissioned by a qualified electrician according to national safety regulations.
If any modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer.
For additional protection against overvoltage and transients, it is recommended to use separate overvoltage protection components.
Refer to the table above to determine the specific specifications of the product based on the module designation, color temperature, CRI, module luminous flux, luminaire luminous flux, and luminaire luminous efficiency.
If any spare parts are required, refer to the part numbers provided and contact the manufacturer or visit their website for purchasing.

DIMENSIONS

BEGA-50607-1-Wall-Luminaire-FIG-1 Instructions for use

Application

Wall luminaire · indoor luminaire made of handblown opal glass, satin matt and metal housing.
For all lighting tasks in interior applications.
Luminaire with a high protection class.

Product Description

Die-cast aluminium and aluminium housing, finish Colour white
Hand-blown opal glass, satin matt
Silicone gasket 2 mounting holes ø 5.5 mm
Distance apart 340×56 mm 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit 220-240 V 0/50-60 Hz
DC 176-276 V
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK03
Protection against mechanical
impacts < 0.35 joule
– Safety mark
– Conformity mark
Weight: 1.8 kg
This product contains light sources of energy efficiency classes D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 10.4 W
Luminaire connected wattage 12.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

50 607.1 K27

Module designation 2x LED-0551/927
Colour temperature 2700 K
Colour rendering index CRI > 90
Module luminous flux 1540 lm
Luminaire luminous flux 1084 lm
Luminaire luminous efficiency 87,4 lm / W

50 607.1 K3

Module designation 2x LED-0551/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1590 lm
Luminaire luminous flux 1120 lm
Luminaire luminous efficiency 90,3 lm / W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Loosen screw of the lateral cover and take off the glass from the luminaire housing.
Lead mains supply cable through the cable entry into the luminaire housing.
Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
Position glass into the base plate and fix it with the screw and the cover.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares