Remote Tech HK18 Keyless Transmitter Instruction Manual

Remote Tech HK18 Keyless Transmitter

Product Information

• Product Name: Electronic Key
• FCC ID: 2AOKM-HK18
• IC: 24223-HK18
• Model: RT-HK4F28
• Part Numbers: RT-S1660, RT-N9080, RT-S1560, RT-N9082, RT-L1500

The electronic key is a remote transmitter that allows you to control various functions of your vehicle, including locking and unlocking the doors and trunk/hatch. It also has additional buttons for remote start and panic.

Product Usage Instructions

• LOCK Button: Pressing the LOCK button will lock all the doors of the vehicle.
• UNLOCK Button: Pressing the UNLOCK button will unlock the driver’s door. Pressing the button again within 5 seconds will unlock the other doors.
• Liftgate Unlock Hold Button: Press and hold this button to open the liftgate if your vehicle is equipped with a power liftgate.
• PANIC HOLD Button: Pressing the PANIC button will activate the vehicle’s alarm system, causing the horn to sound and hazard lamps to flash. To stop the alarm, press any button on the electronic key.
• Forward button and Backward button: These buttons are used for the Remote Forward/Backward function. While pressing either button, the vehicle will move in the corresponding direction.
• REMOTE START Button: Press the remote start button twice within 5 seconds to activate the Remote Start mode. The vehicle will remain in this mode for a 15-minute cycle. Press and release the remote start button once to exit the Remote Start mode.
• FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. It is designed not to cause harmful interference and must accept any interference received. Unauthorized changes or modifications may void the user’s authority to operate the equipment.

Electronic Key

• FCC ID: 2AOKM-HK18
• IC: 24223-HK18
• MODEL: RT-HK4F28
• PART NUMBER: RT-S1660, RT-N9080，RT-S1560，RT-N9082，RT-L1500

This remote has lock, unlock, Liftgate Unlock Hold Button , Forward button and Backward button, remote start Button and panic hold buttons; you can lock and unlock the vehicle doors and trunk/hatch with the remote transmitter.

• LOCK Button: When you press the LOCK button, it locks all the doors.
• UNLOCK Button: Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors.
• Liftgate Unlock Hold Button: Press and Hold. Will open if equipped with power liftgate
• PANIC HOLD Button: When you press the PANIC button, the vehicle will start sounding the horn and flushing the hazard lamp. To stop the alarm, press any button on the electronic key.
• Forward button and Backward button: When using the Remote Forward/ Backward function, the vehicle moves in the direction of the button while the button is pressed.
• REMOTE START Button: Press the remote start button twice within 5 seconds. The vehicle will stay in the Remote Start mode for a 15-minute cycle. Press and release remote start button once to exit Remote Start mode.

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC WARNING:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>