GLOBO 14993-4H HERMI I Pendant Lamp Metal Antique Instruction Manual
- June 16, 2024
- GLOBO
Table of Contents
GLOBO 14993-4H HERMI I Pendant Lamp Metal Antique
Lighting Control Diagram
This document provides a visual representation and instructions related to a lighting control mechanism by GLOBO Handels GmbH.
Company Information
The diagram is associated with GLOBO Handels GmbH, located at:
Gewerbestrasse 3,
A-9184 Sankt Peter,
AUSTRIA
The product code associated with this diagram is 14993-4H.
Lighting Control States
The diagram illustrates the different states of a lighting control switch
with an ‘OFF’ position at the top (labelled as A) and an ‘ON’ position at the
bottom (labelled as C).
Switch Operation
Between the ‘OFF’ and ‘ON’ positions, there are several intermediate stages
(labelled as B) indicated by numbers 1 to 4, as well as depictions of the
switch in various states labelled 5 to 8.
Assembly Instructions
An inset within the diagram provides a step-by-step illustration of the assembly process for the switch, labelled as 3, with steps marked as a, b, and c, indicating the insertion and securing of components.
- Insert component (a).
- Secure in place (b).
- Confirm the component is locked (c).
Specifications
| Company | GLOBO Handels GmbH |
|---|---|
| Address | Gewerbestrasse 3, A-9184 Sankt Peter, AUSTRIA |
| Product Code | 14993-4H |
| Website | www.globo-lighting.com |
FAQ
-
What is the product code for the lighting control switch diagram?
The product code is 14993-4H. -
Where is GLOBO Handels GmbH located?
The company is located at Gewerbestrasse 3, A-9184 Sankt Peter, AUSTRIA. -
How can I find more information about GLOBO products?
You can visit their official website at www.globo-lighting.com for more information about their products. -
What are the steps for assembling the switch according to the diagram?
The assembly steps involve inserting a component, securing it in place, and confirming it is locked. -
How can I tell if the switch is in the ‘ON’ or ‘OFF’ position?
-
The ‘OFF’ position is labelled as A at the top of the diagram, while the ‘ON’ position is labelled as C at the bottom.
INSTALLATION INSTRUCTION
