ALL Security Equipment FAS-RM893 3-Button Remote with Visor Clip User Guide

June 5, 2024
ALL Security Equipment

ALL Security Equipment.jpg

ALL Security Equipment FAS-RM893 3-Button Remote with Visor Clip User

Guide

Phone: +1 (305) 437 9757
www.AllSecurityEquipment.com
Email: hello@allsecurityequipment.com

Address: 6929 NW 52nd St, Miami, FL 33166 USA

Package content

FIG 1 Package content.JPG

Programming Remote controls

This remote Can be used as a replacement remote control for 80 Series,970 Series,890 Series Lift master Remote controls.

Compatible with 315MHZ or 390MHZ garage door openers manufactured after January 1, 1993.Make sure the garage door opener has a working light bulb because it is a programming indicator.

For use with gate operators ,commercial door operators, or other products that are 315MHZ or 390MHZ and have a Learn button.

(The default of 3 buttons is to Programming garage door opener with YELLOW Learn button)

  1. Press and hold 1+2 button at the same time until remote LED flash quickly then off, within 3 Second
  2. Press and release the remote control button you wish to use the number of times that corresponds with the garage door opener type:

FIG 3 Programming Remote controls.JPG

For example, if you press any button 4 times, remote LED will flash 4 times then off, then you can use this button that pressed 4 times to programming with Green Learn button opener.

3. Press and release the Learn button on the garage door opener. The Learn LED will light. within 30 seconds

FIG 4 Programming Remote controls.JPG

4.Press the remote control button programmed in step 2 until the garage door opener lights flash or two clicks are heard.

5.To test, press the programmed button on the remote control…the garage door opener will activate. Last install the visor clip.

NOTE: Access Master, Do-lt, Gatheron, LiftMaster, Link Control, Master Mechanic, Raynor, Sears Craftsman, Steel Craft, True Value are all compatible with Chamberlain technology. Please refer to the relevant learn button.

You can use the Programmed button to control your door now. If your door does not response, please pair up again the button once more. If it still fails, please contact us for further help.

Troubleshooting

FIG 5 Troubleshooting.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals