BEGA 38 300 Ceiling and Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 38 300 Ceiling and Wall Luminaire
DIMENSION
Product Information
Usage Instructions
Instructions for use
Product Description
Safety
Installation
Cleaning Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 38 300 Ceiling and Wall Luminaire

BEGA-38-300-Ceiling-and-Wall-Luminaire-product

DIMENSION

BEGA-38-300-Ceiling-and-Wall-Luminaire-fig-1

Product Information

Product Name: Decken- und Wandleuchte (Ceiling and wall luminaire)
Model Number: 38 300
IP Rating: IP 44
Dimensions: 55 x 180 mm
Weight: 1.2 kg
Material: Aluminium alloy and stainless steel
Features: Opal glass satin matt, protected against granular foreign bodies and splash water, impact strength IK03, safety class I, energy efficiency class F

Usage Instructions

Ensure that the installation and operation of the luminaire comply with national safety regulations.
Installation and commissioning should only be carried out by a qualified electrician.
Avoid touching the light output opening of the LED directly during installation or relamping.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix the luminaire base onto the mounting surface using the provided gasket rings and suitable fixing material.
Make the earth conductor connection.
Push silicone sleeves over the lines and make electrical connections.
Snap the opal glass into the lower spring clips, centralize it, and push it into the upper spring clips.

Note: For additional protection against overvoltage and transients, it is recommended to use separate overvoltage protection components. These components can be found on the manufacturer’s website at www.bega.com.

Instructions for use

Application Lichtbaustein® Square
Ceiling and wall luminaire for many lighting tasks. Ideal for places where a soft and uniform lighting distribution is required.

Lamp

Luminaire connected wattage 10 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

38 300 K3

Module designation LED-0607/830
Color temperature 3000 K
Color rendering index Ra > 80
Module luminous flux 1080 lm
Luminaire luminous flux 808 lm
Luminaire luminous efficiency 80,8 lm / W

Product Description

Luminaire made of aluminum alloy and stainless steel BEGA Unidure® coating technology Opal glass satin matt 2 mounting holes ø 5.5 mm Distance apart 110 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm 4 prefabricated cable ducts for surface mounted mains supply cables Connection terminal 2.5@ Earth conductor connection LED-Module for mains voltage 220-230 V y 50/60 Hz BEGA Thermal Switch® Temporary thermal shutdown to protect temperature-sensitive components Safety class I Protection class IP 44 Protected against granular foreign bodies ≥ 1 mm and splash water Impact strength IK03 Protection against mechanical impacts < 0.35 joule r – Safety mark c – Conformity mark Weight: 1.2 kg This product contains light sources of energy efficiency classes F.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Lead the main supply cable through the cable entry of the luminaire base. Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Be sure to use the gasket rings supplied. Make an earth conductor connection. Push silicone sleeves over the lines and make an electrical connection. Snap the opal glass into the lower spring clips, centralize and push into the upper spring clips.

Cleaning Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high-pressure cleaners.

Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified electrician or a comparably qualified person using standard tools. Disconnect the electrical installation. Pull the glass out of the spring clips and remove it from the luminaire back housing. Clean the glass and luminaire housing using only suitable cleansers. When cleaning please do not use high-pressure cleaners. Please follow the installation instructions for the LED module. A broken glass must be replaced. Snap the glass into the lower spring clips, centralize, and push into the upper spring clips.

Spares