BEGA Šviestuvas stalinis LED 15W IP20 3000K 800lm D-110mm H-480mm aliuminio spalvos Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA Šviestuvas stalinis LED 15W IP20 3000K 800lm D-110mm H-480mm
aliuminio spalvos
Product Information
- Product Description: The luminaire is made of aluminum with a polished aluminum finish. It features hand-blown opal glass with a screw neck.
- Built-in Toggle Switch: The luminaire has a built-in toggle switch for turning it on or off.
- LED Power Supply Unit: The luminaire operates on a LED power supply unit with a voltage range of 220-240 V and a frequency of 50/60 Hz.
- Weight: The luminaire weighs 2.1 kg.
- Safety: The installation and operation of the luminaire should comply with national safety regulations. The manufacturer is not liable for any damage caused by improper use or installation. Any modifications made to the luminaire should be done by a responsible person who will be considered the manufacturer.
- Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage according to DIN EN 61547. Additional protection against transients is recommended and can be found on the manufacturer’s website.
- Lamp Module Specifications:
- Connected Wattage: 13.4 W
- Luminaire Connected Wattage: 15 W
- Rated Temperature: Not specified
- Service Life Criteria: 50,000 hours / L70
Product Usage Instructions
- Installation:
- The luminaire must only be operated with the complete protective cover.
- Insert the glass into the luminaire housing and screw it in by turning it clockwise. Ensure that the gasket is correctly seated.
- Connect the luminaire to the main supply (230 V).
- To turn the luminaire on or off, use the toggle switch located in the lamp base.
- Cleaning and Maintenance:
- Disconnect the electrical installation before cleaning.
- Regularly clean the luminaire with solvent-free cleansers to remove dirt.
- If the protective cover (LED diffuser glass) is broken, it must be replaced.
- Avoid touching the light output opening of the LED directly during installation or relamping, as the LED components are sensitive.
Dimension
Instructions for use
Application
- Table lamp · indoor luminaire made of metal base and hand-blown opal glass for free radiating and glare-free light.
Product Description
- Luminaire made of Aluminium, finish Polished aluminum
- Hand-blown opal glass, with screw neck
- Built-in toggle switch
- Black cable · 2m, with safety plug
- LED power supply unit 220-240 V y 50/60 Hz
- Safety class I
- c – Conformity mark
- Weight: 2.1 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 13.4 W
- Luminaire connected wattage 15 W
- Rated temperature ta =25 °C
- Service life criteria 50000 h/L70 67 547.3K3
- Color temperature 3000 K
- Color rendering index CRI >85
- Module luminous flux 960 lm
- Luminaire luminous flux * 800 lm
- Luminaire luminous efficiency * 53,3 lm/W 67 547.3K4
- Color temperature 4000 K
- Color rendering index CRI >85
- Module luminous flux 1055 lm
- Luminaire luminous flux * 880 lm
- Luminaire luminous efficiency * 58,7 lm/W
- preliminary data
Installation
- The luminaire must only be operated with the complete protective cover.
- Insert glass into the luminaire housing and screw it in by turning it clockwise.
- Make sure that the gasket is seated correctly.
- Connect luminaire to mains supply (230 V).
- To turn the luminaire on or off use the toggle switch in the lamp base.
Cleaning · Maintenance
- Disconnect the electrical installation.
- Clean the luminaire regularly with solvent-free cleansers from dirt.
- A broken protective cover (LED diffuser glass) must be replaced.
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Loosen the screws and remove the protective cover.
- Assemble protective cover (LED diffuser glass)
Spares
- Spare glass 1 1 002 926 41RG
- LED power supply unit DEV- 0201/720
- LED module 65 000 308
- LED module 65 000 309
- BEGA Gantenbrink-Leuchten KG
- Postfach 3160
- 58689 Menden
- info@bega.com
- www.bega.com
Documents / Resources
| BEGA
Šviestuvas stalinis LED 15W IP20 3000K 800lm D-110mm H-480mm aliuminio
spalvos
[pdf] Instruction Manual
67547.3 Table Lamp LED, 67547.3, Table Lamp LED, Lamp LED, LED
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>