BEGA 22 397 Player Wall Luminaire Applique Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 22 397 Player Wall Luminaire Applique
Product Information
This product is a wall luminaire with a shielded light source. It has a high protection class (IP 65) and provides two-sided light output. It is suitable for various lighting tasks in both interior and exterior applications. The luminaire is made of aluminum and stainless steel. It uses an E27 screw base socket and weighs 1.4 kg. The included lamp has a maximum output of 60 W and an efficiency of 20%. The product complies with energy efficiency classes E and F. Additional BEGA LED lamps are available for this luminaire, including a radio-controlled version (Zigbee 3.0). Detailed technical and lighting data for the lamps can be found in the data sheets on the manufacturer’s website.
Product Usage Instructions
- Ensure that the installation and operation of this luminaire comply with national safety regulations.
- Installation and commissioning should only be carried out by a qualified electrician.
- Do not modify the luminaire without proper authorization, as the person responsible for modifications will be considered the manufacturer.
- To clean the luminaire, open it and use appropriate cleaning products. Close the luminaire after cleaning.
- Avoid using high-pressure cleaners for cleaning.
Note: The product also provides spare parts such as LED lamps (3000K), lampholder, and gaskets. The corresponding part numbers are 13 584, 63 000, 052, 83 001, and 111.
OVERVIEW
Instructions for use
Application
Wall luminaire with the shielded light source. A luminaire of high protection
class and with two-sided light output. For a variety of lighting tasks in
interior and exterior lighting applications.
Product Description
- Luminaire made of aluminum alloy, aluminum and stainless steel
- BEGA Unidure® coating technology
- Matt safety glass
- Silicone gasket
- 2 mounting holes ø 5mm Distance apart 172mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5mm
- Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 27
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets
- Impact strength IK04
- Protection against mechanical impacts < 0.5 joule
- r – Safety mark
- c – Conformity mark
- Weight: 1.4 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 60 W
- This product contains light sources of energy
- efficiency classes E, F
- Supplied lamp
- BEGA LED lamp 13584
- LED Retrofit 7 W · 805 lm · 3000 K
- Luminaire efficiency: 20%
- Additional BEGA LED lamps are available for this luminaire:
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K Radio-controlled version (Zigbee 3.0):
- 13 555 LED 9 W · 805 lm · 2700 K dimmable
- 13 556 LED 9 W · 805 lm · 2700-6500 K dimmable · tunable white
- 13 557 LED 9.5 W · 805 lm · 2700-6500 K dimmable · tunable white · RGBW
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
Lead the main supply cable through the cable entry of the luminaire base. Notice the position of using the “arrow down” of the luminaire back plate. Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Be sure to use the gasket rings supplied. Make an earth conductor connection. Push silicone sleeves over the lines and make an electrical connection. Insert lamp. Make an earth conductor connection between the luminaire top and the luminaire base. Make sure that gasket is positioned correctly. Note the position of application of the luminaire top “arrow down”. Replace the luminaire top and tighten the screws evenly
Relamping · Maintenance
- Disconnect the electrical installation.
- Open the luminaire and clean it.
- Use only solvent-free cleaning agents. Change the lamp.
- Check the gasket and replace, it if necessary.
- Close the luminaire.
- For cleaning, do not use high-pressure cleaners.
Spares
- LED lamp 3000K 13 584
- Lampholder 63 000 052
- Gasket 83 001 111
CONTACT
- BEGA Gantenbrink-Leuchten KG
- Postfach 3160
- 58689 Menden
- info@bega.com.
- www.bega.com .
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>