BEGA 50072.2 LED Wall Luminaire Instruction Manual

BEGA 50072.2 LED Wall Luminaire

Product Information

• Product Name: Luminaire
• Model Number: 50 072.2
• K3 Lamp Type: LED Colour
• Temperature: 3000 K
• Colour Rendering Index (CRI): > 90 Module
• Luminous Flux: 1910 lm
• Luminaire Luminous Flux: 652 lm
• Luminaire Luminous Efficiency: 44.1 lm/W

Application

• Wall luminaire · indoor luminaire with integrated power supply unit for many lighting tasks in interior applications.
• The light emits upwards and downwards.

Product Description

• Die-cast zinc luminaire housing, finish Stainless steel
  Crystal glass, inside white

• 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@

• Connection terminal 2.5@

• Earth conductor connection

• BEGA Ultimate Driver®

• LED power supply unit

• 220-240 V x 0/50-60 Hz

• DC 176-264 V

Safety class I

• – Safety mark
• c – Conformity mark
• Weight: 0.7 kg
• This product contains light sources of energy efficiency class(es) D

Safety

• The installation and operation of this luminaire must comply with national safety regulations.
• Only a qualified electrician should carry out the installation and commissioning.
• The manufacturer is not liable for any damage caused by improper use or installation.
• Any modifications made to the luminaire should be done by a responsible person considered as the manufacturer.

Overvoltage Protection

• The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547.
• For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website. 3.

Lamp

• Module connected wattage 4 W
• Luminaire connected wattage 5.2 W
• Rated temperature ta=25 °C
• Ambient temperature ta max=45 °C

23 013.2K3

• Module designation 2x LED-0234/930
• Colour temperature 3000 K
• Colour rendering index CRI > 90
• Module luminous flux 610 lm
• Luminaire luminous flux 263 lm
• Luminaire luminous efficiency 50,6 lm/W

Installation

• LED are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Undo screws and lift off luminaire top.
• Lead the mains supply cable through the cable entry into the luminaire back housing.
• Note position of application “arrow down”.
• Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
• Pull silicone sleeves over the wires.
• Make earth connection and electrical connection to the terminals.
• Make earth conductor connection between luminaire top and luminaire base (plug connection).
• Note position of application “arrow down” of luminaire housing.
• Install luminaire top part, adjust it and tighten screws.

Cleaning · Maintenance

• Clean luminaire regularly with solvent-free cleansers from dirt.
• Defective glass must be replaced.

Replacement of LED Module

• The designation of the LED module is mentioned on a label inside the luminaire.
• BEGA replacement modules have the same light color and output as the originally fitted modules.
• Qualified individuals can replace the module using standard tools.
• Before replacing the module, disconnect the system and open the luminaire
• Follow the installation instructions provided for the LED module.
• If the glass is defective, it should be replaced.
• Close the luminaire after completing the replacement.

Spares

– DEV-0194/370: LED Power Supply Unit – LED-0518/930: LED Module (3000 K)

BEGA Gantenbrink-Leuchten KG

• Postfach 3160
• 58689 Menden
• info@bega.com
• www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>