BEGA 23013.2 LED Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 23013.2 LED Wall Luminaire
Product Information
- Product Name: Luminaire (Light Fixture)
- Manufacturer: BEGA
- Model Number: 23 013.2 K3
- Lamp Type: LED
- Lamp Wattage: 4 W
- Luminaire Wattage: 5.2 W
- Rated Temperature: ta = 25°C to ta max = 45°C
- Colour Temperature: 3000 K
- Colour Rendering Index (CRI): > 90
- Module Luminous Flux: 610 lm
- Luminaire Luminous Flux: 263 lm
- Luminaire Luminous Efficiency: 50.6 lm / W
- Replacement LED Module: LED-0234/930
Application
Wall luminaire · indoor luminaire with integrated power supply unit for many lighting tasks in interior applications. The light emits upwards and downwards.
Product Description
-
Die-cast zinc luminaire housing, finish Stainless steel
-
Crystal glass, inside white
-
1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
Connection terminal 2.5@ -
Earth conductor connection
-
BEGA Ultimate Driver®
-
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V -
Safety class I
-
– Safety mark
-
c – Conformity mark
-
Weight: 0.7 kg
-
This product contains light sources of energy efficiency class(es) D
Safety
- The installation and operation of the luminaire must comply with national safety regulations.
- Only a qualified electrician should perform the installation and commissioning.
- Improper use or installation may cause damage, and the manufacturer does not accept liability for such damage.
- If any modifications are made to the luminaire, the person responsible for the modifications is considered the manufacturer.
Overvoltage Protection
- The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547.
- For additional protection against transients, it is recommended to use separate overvoltage protection components available on the BEGA website.
Lamp
- Module connected wattage 4 W
- Luminaire connected wattage 5.2 W
- Rated temperature ta=25 °C
- Ambient temperature ta max=45 °C
23 013.2K3
- Module designation 2x LED-0234/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 610 lm
- Luminaire luminous flux 263 lm
- Luminaire luminous efficiency 50,6 lm/W
Installation
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Undo screws and lift off luminaire top.
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Note position of application “arrow down”.
- Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
- Pull silicone sleeves over the wires.
- Make earth connection and electrical connection to the terminals.
- Make earth conductor connection between luminaire top and luminaire base (plug connection).
- Note position of application “arrow down” of luminaire housing.
- Install luminaire top part, adjust it and tighten screws.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
- Defective glass must be replaced.
Replacement of the LED Module
- The designation of the LED module is labeled on the luminaire.
- BEGA replacement modules have the same light color and light output as the originally fitted modules.
- Qualified individuals can replace the module using standard tools.
- Before replacing, disconnect the system and open the luminaire.
- Follow the installation instructions provided for the LED module.
- If the glass is defective, it should be replaced.
- Close the luminaire after completing the replacement.
Spares
LED Power Supply Unit: DEV-0303/350 – LED Module: LED-0234/930 (3000 K)
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>