BEGA 78634 Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 78634 Ceiling and Wall Luminaire
Product Information
The product is a luminaire that requires installation and operation according to national safety regulations. The installation and commissioning should only be done by a qualified electrician. The manufacturer does not accept liability for damage caused by improper use or installation. The luminaire is equipped with electronic components that are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website.
The product has the following specifications:
- Lamp Module Connected Wattage: 7.6 W
- Luminaire Connected Wattage: 8.8 W
- Rated Temperature: 25°C – 45°C
- Ambient Temperature: 25°C – 45°C
- Module Designation: 2x LED-0343/930
- Colour Temperature: 3000 K
- Colour Rendering Index (CRI): > 90
- Module Luminous Flux: 1260 lm
- Luminaire Luminous Flux: 900 lm
- Luminaire Luminous Efficiency: 102.3 lm/W
Product Usage Instructions
To release the glass from the luminaire housing, turn it counter-clockwise beyond the spring closure resistance.
For LED module replacement, follow these steps:
- Disconnect the luminaire from the main power supply.
- Unscrew the glass by turning it counterclockwise beyond the spring closure resistance and remove it from the luminaire housing.
- Clean the glass and luminaire regularly with solvent-free cleansers to remove dirt.
- Disassemble the existing LED module.
- Assemble the new LED replacement module, following the installation instructions provided with the module.
- Attach the glass to the luminaire housing and turn it clockwise until it is locked.
- If the glass is broken, it must be replaced.
The product also offers spare parts:
- Spare Glass: 11 002 835
- LED Power Supply Unit: 11M RG DEV-0304/350
- LED Module 3000 K: LED-0343/930
Ceiling and wall luminaire for indoor use
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass
and metal housing, for all lighting tasks. They are ideal for places where a
soft and uniform lighting distribution is required.
Product description
-
Luminaire made of painted metal housing,
finish Colour white -
Crystal glass, inside white
-
1 cable entry for mains supply cable
-
2 mounting holes ø 5.5mm
-
Distance apart 150mm
-
The luminaire is suitable for through-wiring.
-
Connection terminal 2.5@
-
Earth conductor connection
-
BEGA Ultimate Driver®
-
LED power supply unit
220-240 V x 0/50-60 Hz -
DC 176-264 V
-
BEGA Thermal Switch®
-
Temporary thermal shutdown to protect
temperature-sensitive components -
Safety class I
-
– Safety mark
-
CE – Conformity mark
-
Weight: 2.5 kg
This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we
recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 7.6 W
- Luminaire connected wattage 8.8 W
- Rated temperature ta=25 °C
- Ambient temperature ta max=45 °C
78 634K3
- Module designation 2x LED-0343/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1260 lm
- Luminaire luminous flux 900 lm
- Luminaire luminous efficiency 102,3 lm/W
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
Lead the mains supply cable through the cable entry of the luminaire base.
Note position of application of the luminaire “arrow down”.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection to the
terminals.
Attach glass to luminaire base and turn the glass clockwise until it is
locked.
The spring closure provides a safe and vibration-resistant holding of the
glass.
To release the glass from the luminaire housing, turn it counter-clockwise
beyond the spring closure resistance
Replacement of the LED module
Disconnect from main supply.
Unscrew the glass by turning it counterclockwise beyond the spring closure
resistance and take it off the luminaire housing.
Clean glass and luminaire regularly with solvent-free cleansers from dirt.
Disassemble LED module.
Assemble LED replacement module.
Note installation instructions of the LED module.
Attach glass to luminaire housing and turn the glass clockwise until it is
locked.
A broken glass must be replaced.
Spares
- Spare glass 11 002 835 11MRG
- LED power supply unit DEV-0304/350
- LED module 3000 K LED-0343/930
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com