BEGA 50 038 Ceiling and Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50 038 Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
Ceiling and wall luminaire for indoor use
Instructions for use
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50 038 Ceiling and Wall Luminaire

BEGA-50 038-Ceiling-and-Wall-Luminaire-PRODUCT-IMAGE

Product Information

Safety| The installation and operation of this luminaire are subject to
national safety regulations. Installation and commissioning may
only be carried out by a qualified electrician. The manufacturer
accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be
considered the manufacturer.
---|---
Overvoltage Protection| The electronic components installed in the luminaire are
protected against overvoltage in accordance with DIN EN 61547. To
achieve additional protection against transients and other factors,
separate overvoltage protection components are recommended. These
components can be found on our website at www.bega.com.
Lamp Information| | Lamp Type| LED
---|---
Color Temperature| 2700 K (Kelvin), 3000 K (Kelvin)
Color Rendering Index (CRI)| > 90
Module Luminous Flux| 6225 lm (lumens) – 6435 lm (lumens)
Luminaire Luminous Flux| 3858 lm (lumens) – 3988 lm (lumens)
Luminaire Luminous Efficiency| 81.4 lm/W (lumens per watt) – 84.1 lm/W (lumens per watt)

Product Usage Instructions

Luminaire with Trim Ring: Before installing onto the mounting surface, the luminaire housing must be inserted into the trim ring (accessory).

To Release the Glass: Turn it counter-clockwise.

Replacement of the LED Unit:

The designation of the LED unit is noted on a label in the luminaire.
The light color and light output of BEGA replacement units correspond to those of the LED units originally fitted.
The LED unit can be replaced by qualified persons using standard tools.
Disconnect from the main supply.
Unscrew the glass from the luminaire housing by turning it counter-clockwise.
Replace the LED unit.
Screw in the glass by turning it clockwise.
Defective glass must be replaced.

Note: Metal trim rings in 3 enamel surfaces are optional accessories and must be ordered separately. The available colors are white, palladium, and glossy silver.

Ceiling and wall luminaire for indoor use

BEGA-50 038-Ceiling-and-Wall-Luminaire-01

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required.

Product description

Metal housing, finish Color white
Hand-blown opal glass, satin matt, with bayonet closure 2 mounting holes ø 6 mm
Distance apart 340 mm
2 cable entries for through-wiring for mains cable up to ø 10,5 mm max. 5 x 1.5@ Connection terminal 2.5@
Earth conductor connection
LED power supply unit 220-240 V x 0/50-60 Hz
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Safety mark
CE – Conformity mark
Weight: 5.0 kg

This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 42.6 W
Luminaire connected wattage 47.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C

50 038 K27

Color temperature 2700 K
Color rendering index CRI > 90
Module luminous flux 6225 lm
Luminaire luminous flux 3858 lm
Luminaire luminous efficiency 81,4 lm / W

50 038 K3

Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 6435 lm
Luminaire luminous flux 3988 lm
Luminaire luminous efficiency 84,1 lm / W

Luminaire with trim ring:
Before installing onto the mounting surface the luminaire housing must be inserted into the trim ring (accessory).

Installation
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Pass the mains supply cable through the grommet into luminaire housing.
Fix luminaire housing with enclosed or any other suitable fixing material on to the mounting surface.
It is imperative to use the enclosed gaskets. Dismantle the mains supply cable approx. 60 mm.
Pull silicone sleeves over the wires and make earth and electrical connection to the terminals. For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
Place glass to the luminaire housing and observe that the cam pins fit into the notches of the glass.
Screw in glass by turning it clockwise. Thus, you reach a safe and vibration- resistant holding of the glass.
To release the glass from the luminaire housing turn it counter-clockwise.

Replacement of the LED unit
The designation of the LED unit is noted on a label in the luminaire.
The light color and light output of BEGA replacement units correspond to those of the LED units originally fitted. The LED unit can be replaced by qualified persons using standard tools.
Disconnect from main supply.
Unscrew glass from luminaire housing by turning it counter-clockwise.
Replace the LED unit.
Screw in glass by turning it clockwise. Defective glass must be replaced.

Accessory · Trim rings
For this luminaire metal trim rings in 3 enamel surfaces are optional available.
Trim rings are accessories and must be ordered separately.

Item Part. No