BEGA 67481.2 Indoor Floor Lamp Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 67481.2 Indoor Floor Lamp
Product Information
| Product Description | Armatur aus Edelstahl |
|---|---|
| Weight | 7.0 kg |
| Lampholder | E 27 |
Technical Specifications
| Lamp Output | Max. 100 W |
|---|---|
| Luminaire Efficiency | 80% |
| Light Source | Lamp with screw base E 27 |
| Dimmable | Yes (Supplied lamp) |
Usage Instructions
To install the luminaire:
- Insert the lamp into the lampholder.
- Place the glass over the fitter and fix it with the lateral head nuts.
- Connect the luminaire to the mains supply.
To turn the luminaire on or off:
- Slide the controller of the foot dimmer.
To adjust the light intensity:
- Use the foot dimmer to adjust the brightness infinitely.
Please note:
- The foot dimmer of the luminaire is only suitable for the operation of a dimmable LED lamp with a maximum power of 35 W. If an incandescent lamp is used, the maximum power range of the lamp is 100 W.
For detailed technical and lighting data for the lamps, please refer to the data sheets on our website.
Floor lamp for indoor use
Instructions for use
Application
Floor lamp · indoor luminaire made of metal base and hand-blown opal glass for
free radiating and glare-free light.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
This product contains light sources of energy efficiency class E
Supplied lamp
- BEGA LED lamp 13565
- LED 12 W · 1400 lm · 2700 K dimmable
Supplied lamp
- BEGA LED lamp 13592
- LED 12 W · 1400 lm · 3000 K dimmable
- Luminaire efficiency: 80%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Please note:
The foot dimmer of the luminaire is only suitable for the operation of a
dimmable LED lamp with a max. power of 35 W.
If an incandescent lamp is used, the max. power range of the lamp is 100 W.
Product description
- Stainless steel housing
- Hand-blown opal glass
- Black cable · 2 m, with safety plug
- Foot dimmer for infinite light adjustment (100 % – 30 %)
- Dimmer 230-240 V y 50 Hz
- Lampholder E 27
- Safety class I
- CE – Conformity mark
- Weight: 7.0 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Installation
Insert lamp into lampholder.
Place glass over fitter and fix it with the lateral head nuts.
Connect luminaire to mains supply.
To turn the luminaire on or off slide the contoller of the foot dimmer.
The light intensity can be adjusted infinitely.
Relamping · Maintenance
Disconnect the electrical installation.
Take off glass from the glass support. Remove the lamp.
Clean luminaire and glass.
Use only solvent-free cleansers.
Insert lamp into lampholder.
Spares
- Spare glass 11 003 138 .1M RG
- LED lamp 2700 K 13 565
- LED lamp 3000 K 13 592
- Glass insert 57 000 049
- Lampholder 63 000 339
- Connecting cable with foot dimmer 75 004 892
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · [email protected] · www.bega.com