BEGA 12162 Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 12162 Ceiling and Wall Luminaire
Product Information:
Safety| The installation and operation of this luminaire are subject to
national safety regulations. Installation and commissioning may
only be carried out by a qualified electrician. The manufacturer
accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be
considered the manufacturer.
---|---
Overvoltage Protection| The electronic components installed in the luminaire
are
protected against overvoltage in accordance with DIN EN 61547. To
achieve an additional protection against e.g. transients, etc., we
recommend separate overvoltage protection components. You can find
them on our website at www.bega.com.
Lamp Module connected wattage| 31.8 W
Luminaire connected wattage| 35 W
Rated temperature| Ambient temperature
25°C| 50°C
Module designation| LED-0531/930
Colour temperature| 3000 K
Colour rendering index| CRI > 90
Module luminous flux| 4645 lm
Luminaire luminous flux| 3600 lm
Luminaire luminous efficiency| 102.9 lm/W
Product Usage Instructions
Place the glass to the luminaire housing and observe that the holding spring bolts fit into the notches of the glass. Turn the glass clockwise until it is locked. This ensures a safe and vibration-resistant holding of the glass. To release the glass from the luminaire housing, turn it counterclockwise.
Ceiling and wall luminaire for indoor use
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass
and metal housing, for all lighting tasks. They are ideal for places where a
soft and uniform lighting distribution is required.
Product Description
- Metal housing, finish Colour white
- Hand-blown opal glass, with sliding-bolt closure
- 2 mounting holes ø 5.5 mm
- Distance apart 253 mm
- 1 cable entry for through-wiring for mains cable
- Connecting terminal 2.5@ with plug connection
- Earth conductor connection
- 2-pole connecting terminal for digital control
- LED power supply unit
- 220-240 V x 0/50-60 Hz
- DC 170-276 V
- DALI-controllable
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- Impact strength IK05
- Protection against mechanical impacts < 0.7 joule
- – Safety mark
- – Conformity mark
- Weight: 7.5 kg
This product contains light sources of energy efficiency class(es) E
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 31.8 W
- Luminaire connected wattage 35 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 50 °C
12 162 K3
- Module designation LED-0531/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 4645 lm
- Luminaire luminous flux 3600 lm
- Luminaire luminous efficiency 102,9 lm / W
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
- Disassemble LED module.
- Loosen LED connection and earth connection (plug connection).
- Dismantle the mains supply cable max. 80 mm.
- Lead mains supply cable through the cable entry into the luminaire housing.
- Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make earth and electrical connection to the terminal.
- For digital control please use the connecting terminal DA, DA.
- In case this terminal is not used the luminaire will be operated at full light output.
- Make earth connection between LED module and luminaire housing (plug connection).
- Push LED plugs into couplers as far as it will go.
- Assemble LED module.
- Tighten the screws evenly (max. 0,8 Nm).
- Please observe that the LED module is not damaged mechanically.
ATTENTION!
It is mandatory to make sure not to damage the wires while fixing the opal
glass.
Insert the opal glass into the luminaire housing with sliding bolt glass
closure and turn the glass clockwise up to the stop.
Place glass to the luminaire housing and observe that the holding springbolts
fit into the notches of the glass.
Turn the glass clockwise until it is locked.
Thus, you reach a safe and vibration-resistant holding of the glass.
To release the glass from the luminaire housing, turn it counter-clockwise.
Replacement of the LED module · Maintenance
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system.
- Unscrew glass from luminaire housing by turning it counter-clockwise.
- Clean glass and luminaire regularly with solvent-free cleansers from dirt.
- Please follow the installation instructions for the LED module.
- Screw in glass by turning it clockwise as far as it will go.
- A broken glass must be replaced.
Spares
Spare glass 11 002 990 .1R G
LED power supply unit DEV-0391/700
LED module 3000 K LED-0531/930
Grommet 83 001 391
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com